Farming Simulator 25 mods

Realistic Water & Soil Management (RWSM) v 1.4.0.2

Realistic Water & Soil Management expands Farming Simulator 25 with a permanently stored water, soil and plant balance. Rain, irrigation, evaporation, soil type, terrain, compaction, tire pressure, tillage and plant development are directly intertwined. As a result, fields no longer only react with simple conditions such as “dry” or “wet”, but rather have a multi-layered water balance with topsoil, root zone and subsoil. Natural depressions stay moist longer, heavy vehicles compact wet soil more and inadequate tire pressure increases the load on the topsoil. These influences have long-term effects on soil structure, root health, plant development and yield. Features Multi-layered water balance The soil water balance is calculated separately for: Topsoil from 0 to 10 cm Root zone from 10 to 30 cm Subfloor from 30 to 60 cm Precipitation, irrigation, evaporation, seepage, drainage, surface runoff, plant water absorption, soil type, soil structure, compaction and landform are taken into account. The usable field capacity is displayed separately from the complete pore saturation. Water above field capacity appears as excess water and can seep away, run off or cause waterlogging. Different soil types RWSM differentiates between different types of soil with their own properties, including: loamy sand sandy loam Clay silty clay Each soil type has its own values for field capacity, wilting point, water retention, infiltration, drainage, bearing capacity, risk of compaction and sinking depth. Sandy soils dry faster. Loamy and clay-rich soils store more water, but remain soft longer and are at risk of compaction. Dynamic weather and climate Regional climate profiles influence: Precipitation Temperature Evaporation Wind Humidity Sunlight exposure Seasonal distribution The game’s actual weather data directly affects soil moisture, drying and evaporation. Realistic drying Drying does not take place via a simple timer. Temperature, wind, sun, humidity, soil type, compaction and surface water determine the speed. A wetness memory prevents a field from becoming completely dry and viable again immediately after rain. #Natural depressions and waterlogging RWSM detects local low areas within a field. These areas: collect water dry more slowly have lower load capacity Promote sinking and track formation increase the risk of compaction can cause oxygen deficiency to the roots The terrain evaluation is cached for better performance. Soil compaction The compression is saved separately for: Topsoil Root space Underbody have an influence: Vehicle weight Payload Wheel load Axle load Tire width Tire pressure recommended field pressure Soil moisture Soil type Slip Speed Cornering Multiple crossings High tire pressure puts greater strain on the topsoil for the same wheel load. A suitable low field pressure increases the contact area and protects the ground. High axle loads can still compact deeper soil layers. Multiple crossings Repeated crossings of the same lane are taken into account. The first crossing usually causes the greatest immediate damage. Further passes further compact the already contaminated soil. Among other things, the following are saved: Crossings Compaction Track depth Shear damage Plant damage Edit history Roots and plant stress RWSM simulates: Root health Fine root health achievable root depth Drought stress Waterlogging Lack of oxygen Compaction stress Nutrient stress pH stress mechanical damage Damaged roots are less able to absorb water and nutrients. Impact on earnings The actual yield is influenced, among other things, by: Water balance Dryness Waterlogging Root health Compaction Soil structure Nutrients pH value Seedbed Weeds Lanes mechanical damage Damage does not take full effect immediately, but builds up depending on the strength and duration. Crop Vitality Visuals (Alpha Version) A stored vitality system creates local differences in the plant population. Possible are: different plant heights changed stock density incomplete stocks Visible stress zones weaker development Storage locations The plants remain technically ready for harvest. RWSM does not alter original growth or harvest maturity levels. Weed competition Weeds compete with cultivated plants for water, nutrients, light and development space. Strong weed pressure can reduce development and yield.## Tillage Different devices have different effects: Plow Cultivator Disc harrow Rotary harrow Subsoiler Seeder Roller Working depth, soil moisture, compaction, soil structure, seedbed strength, multiple cultivation and possible plow soles are evaluated. Deep loosening is only fully effective when the soil moisture is suitable. Cultivating when the soil is too wet can cause additional structural and lubrication damage. Seedbed and rollers RWSM evaluates seedbed strength. A seedbed that is too loose offers poor soil sealing. Too much reconsolidation can impair air flow and root development. Rolling acts as a real area-wide reconsolidation and is evaluated depending on the type of soil, moisture and compaction. Irrigation system The mod includes a functional Rainstar irrigation system with: Motor pump Hose reel Sprinkling rail adjustable pump pressure adjustable radius real application rate Water consumption Soil input in millimeters automatic hose retraction Work and transport mode Parking brake Clutch aid Connection markers sound visible water jet The water applied changes the actual water balance of the soil. Extended field info The field info shows, among other things: Topsoil moisture Pore saturation Surface condition Excess water Water in all layers of soil Soil type Evaporation Temperature and wind Compaction Soil structure Seedbed strength Root condition Plant vitality visible height and density main cause of stress Climate values Water-Soil API RWSM provides a versioned interface for other mods. The API provides, among other things: Soil type Soil moisture Pore saturation water available to plants Surface moisture Carrying capacity Trafficability Sink factor possible sinking depth Compaction Track depth Root condition Evaporation recommended tire pressure Plant vitality Other mods can report traffic loads and ground effects back to RWSM. Connection with Visual Mud Tracks In connection with Visual Mud Tracks, among other things, the following are transmitted: Wheel load Axle load Tire pressure Tire width Slip Vehicle weight Payload Soil moisture Carrying capacity Sink factor possible track depth This allows visible tracks, sinking, mud and tire behavior to be linked to the actual ground condition. Saving and multiplayer The following are permanently stored and synchronized, among other things: Water balance Precipitation history Compaction Track depth Soil structure Root condition Edit history Plant vitality Irrigation data Pump pressure Irrigation radius Hose retraction The calculation is server authoritative and designed for multiplayer saves. Highlights 1. Multi-layered water balance Topsoil, root zone and subsoil react separately to rain, irrigation, evaporation and infiltration. 2. Long-term compaction with an impact on yield Tire pressure, wheel load, axle load, soil moisture, slip and multiple passes influence the soil and plants in the long term. 3. Direct connection to Visual Mud Tracks Soil moisture and load capacity control sinking, tracks, mud and tire behavior. 4. Local waterlogging in natural depressions Low areas stay wet for longer and become real problem areas. 5. Visible Plant Vitality Elevation, density and stress zones can vary locally without changing crop maturity. 6. Realistic tire pressure influence Excessive pressure increases topsoil stress, while appropriate field pressure protects the soil. 7. Root Health and Long-Term Plant Stress Dryness, waterlogging, compaction, pH value and nutrients work together. 8. Functional irrigation Pump pressure, radius and application rate determine the real water input. 9. Different tillage systems Plows, cultivators, subsoilers and rollers have their own effects and risks. 10. Extensive field info Water, soil, compaction, roots, seedbed and plant condition are directly visible. 11. Persistent Multiplayer System Ground and water damage is retained and synced after saving. 12. Open Water-Soil API Other mods can read land values and connect their own systems to them. 13. No change in growth stages RWSM assesses and visualizes plant stress without overwriting original harvest maturity levels. The pump only reads the real vanilla hose status: Hose not connected Pump does not start Hose disconnected while pump is running Pump switches off immediately Weather Hud 3 size adjustment options now available. Normal, small, very small And Vanilla Hud Performance fixes Required mods: Precision Farming Visual Mud Tracks Version 1.4.0.2: * The processing of terrain and density map data has been optimized and distributed more evenly across multiple frames. Completely rewritten. This reduces load spikes and stuttering during tillage * Additionally, a Dedicated Server bug occurring during the day change has been fixed. It could interrupt the updating of NPC fields. The reduced and stress dependent crop heights, as well as all terrain, weather and yield functions, remain unchanged * Previously removed or incompatible cell formats will not be read again * All new upcoming versions will be based on the new system and remain in place * Unfortunately, old savegame data, such as soil moisture and similar data, will not be loaded because there were problems with the old system

Visual Mud Tracks v 1.4.0.6

Visual Mud Tracks expands Farming Simulator 25 with a comprehensive simulation of lanes, soil moisture, tire behavior, compaction, fruit destruction, root damage and bogging. This means that vehicles react much more realistically to dry, moist and water-saturated soils. The mod is designed for single player and multiplayer and can work with the **Realistic Water & Soil Management System**. Soil moisture, load capacity and waterlogging not only influence the display, but also tire contamination, sinking, slippage, driving resistance and plant damage. Physical lanes and terrain grooves Tires can permanently lower the terrain and create real grooves in the terrain heightmap. The depth and width of the tracks are calculated individually for each wheel. To be taken into account: Vehicle weight actual wheel load Tire width and tire radius Tire pressure Soil moisture Soil saturation Carrying capacity Speed Wheel slip Cornering Number of previous crossings Trailers, levels and attachments Left and right bike lanes remain separate. The center of the vehicle is not lowered unnecessarily. The grooves have a narrow, steep cross section so that the edge areas do not sink over a large area. Existing tracks can be deepened by further difficult crossings. A maximum depth protects the terrain from extreme deformation. The groove is created directly at the actual wheel contact. There is no delayed post-processing behind the vehicle. Steered, mirror mounted and differently aligned wheels are taken into account. Restoration through tillage Physical lanes can be removed again through appropriate tillage. The following are supported, among others: Plows Cultivator Disc harrows Subsoiler Mulcher Reels Seeders Direct seeding machines Planters The terrain is only reset within the actual work area being worked on. Pending trace calculations and saved visual traces are also removed there. Safe Terrain Journal The mod uses separate savegame files: `visualMudTracksTerrainBackup.xml` `visualMudTracksActiveRuts.xml` `visualMudTracksState.xml` The original terrain height of a cell is saved during the first intervention and is not later overwritten by further passes. Active grooves and recovery information are managed separately. This allows tracks to be reset in a more controlled manner. Interrupted restores can be resumed the next time you start the game. Important note for updates: Before switching from an older version, existing lanes with the old version still installed should be removed using tillage equipment and the score saved. Grooves that have already been permanently written into the terrain height map may otherwise remain. Visible and physical sinking Tires visibly and physically sink on soft and wet surfaces. The sinking is implemented via the effective wheel physics radius. This means that the tires, suspension and ground contact react together. The sinking occurs progressively and not suddenly. On solid ground, the wheel lifts itself out of the ground in a controlled manner. The sinking depth depends on: Soil moisture Saturation Carrying capacity Wheel load Tire width Tire pressure Speed Slip existing track depth Wide tires distribute the load better. Narrow, heavily loaded tires cut deeper. Tire pressure system The tire pressure can be changed while driving. The value is saved for each wheel and synchronized in multiplayer. Low tire pressure: increases the contact area Improves grip on soft ground reduces cutting can make it easier to get out of soft tracks High tire pressure: reduces the contact area increases cutting increases the risk of getting stuck on wet ground may be cheaper on solid ground A compact HUD shows the current pressure in bar and evaluates it in color. Soil moisture HUD and RWSM connection The Soil Moisture HUD shows the current RWSM topsoil value in percent. The display uses the same soil moisture value as the RWSM field info. Values ​​above 100 percent can represent severe waterlogging or waterlogging. RWSM soil moisture affects: Sludge content Tire contamination Particle effects Carrying capacity Sinking depth Tire grip Wheel slip Groove depth Danger of getting stuck Fruit and root damage Increased soil moisture caused by irrigation can also change the soil physics. Tire dirt and mudThe amount of mud is stored individually for each tire. A tire remains dirty after leaving the field and cleans itself depending on the surface. Asphalt cleans quickly Gravel cleans slower Clean dirt roads only slightly high speed throws more mud out of the tread Rain also washes off the tires a light film of dirt may remain The particle effects distinguish between dry earth and wet mud. Included are: fine dry soil particles medium dry soil particles fine wet splashes medium mud particles rare heavy mud lumps The amount of particles depends on wheel rotation, slip, tire width, radius, moisture, sink factor and load capacity. Particles are only generated when there is suitable ground contact. Progressive stuck physics On heavily waterlogged and less stable ground, a vehicle can progressively become stuck. Continuous slippage causes driven wheels to dig in further. At the same time, the transferable grip decreases and the driving resistance increases. To be taken into account: Soil moisture and saturation Carrying capacity Wheel load Tire pressure Slip Speed Engine utilization Engine speed Tensile load Working resistance Duration of exposure Plows, cultivators, disc harrows, subsoilers, seed drills, power harrows and rollers produce different pulling resistances. Working width and working depth influence the power requirement. In extreme conditions, propulsion can be almost completely lost. Lifting or uncoupling an implement immediately reduces the additional load. Controlled reversing can reduce the digging condition and free the vehicle along its own lane. Soil compaction Vehicles compact the top and bottom soil depending on wheel load, soil moisture, slip and number of passes. Included are: Topsoil compaction Subsoil compaction Stronger compaction in wet soil Multiple experiences Additional load due to cornering and slipping Plow sole for frequent plowing Different effects of plow, cultivator and subsoiler Targeted reconsolidation by rolling slow biological recovery Compaction and soil structure can be viewed in the field info. Fruit destruction Plants in the immediate tire area may be damaged or completely removed. The native LS25 fruit destruction is used for this. The damage depends on: Wheel load Tire width Soil moisture Slip Cornering Growth stage Root health Soil structure Number of crossings Young plants react more sensitively. Repeated crossings significantly increase the damage. Normal tires remove plants after several trips over the same spot at the latest. Detected maintenance tires reduce the damage, but do not prevent it completely if the vehicle is driven frequently. Root Health Each contaminated soil cell can receive its own root health value. Root damage occurs due to: high wheel load wet ground strong slip Cornering Multiple crossings unfavorable growth stages compacted soil If root health declines, the risk of visible plant damage increases. below 70 percent: increased sensitivity below 40 percent: further crossings lead to destruction more quickly less than 20 percent: very high risk of failure Root health is saved and can slowly recover biologically. Field info and settings menu The mod expands the field information to include numerous land values, including: Soil compaction Underbody status Root health Soil structure Sink factor Carrying capacity Fruit and root damage The settings menu contains detailed descriptions of all options. High and low values, interactions, performance consequences and save game effects are explained. The menu texts are available in twelve languages: German, English, French, Spanish, Italian, Dutch, Polish, Portuguese, Russian, Czech, Hungarian and Turkish. Multiplayer and performance The crucial physics calculations run on the server side. Tire pressure, contamination and important soil conditions are synchronized. To optimize performance, the mod uses: limited groove points adjustable storage intervals Event and bulk caches sleeping floor cells Reduced refresh rates for removed or inactive areas delayed safe initialization of the particle systems Clean release of particle effects when deleting vehicles Required mods: Realistic Water & Soil Management (RWSM) Version 1.4.0.6: * Performance on multiplayer servers significantly improved * Fixed an error where the moisture of RWSM was not detected correctly, causing the vehicle to barely create deeper tracks

Dacia Logan v 1.0

The 2021 Dacia Logan is a spacious, budget friendly sedan with a massive 528 liter trunk and efficient 3 cylinder engines, including a highly economical factory LPG option. Version 1.0: * Paint repaired

Audi A4 v 1.0.0.2

Price: 30.000 Power: 453 Version 1.0.0.2: * New Mod/Store icons (FS25 version) * Fixed front bumper painting

BMW E39 530D v 1.0.0.8

Main color configurations Back window sticker configurations License plate configurations X-Fun mode (To drift around) Version 1.0.0.8: * Vehicle years mod support added

BMW E39 v 1.0.0.9

Price: €25,270 Power: 400 hp Main color configurations Working lights Working passenger seats for multiplayer Fixed outside camera Base game license plates Version 1.0.0.9: * Vehicle years mod support added

John Deere 8000 Series Dark Style v 1.0

Price: 95,000$ Power: 160-2000hp Top speed: 60 km/h Configurations: Beacon lights Flash light Fenders Exhaust Wheels Sticker Flag Mirrors Front weight and front hydaulic

Transport Company v 1.3.1.0

Your map is already full of silos, dairies and mills moving goods between them. None of it pays you a penny. Buy a headquarters and it does. Freight jobs are generated from the stations that already exist on your map, priced against the live economy. Haul them yourself, or put a driver in the cab and let the base game AI run the route while your fleet quietly books the miles, the diesel and the profit truck by truck. Features Contract Board Jobs are generated from real stations on your map, using the live economy price of the goods to set the reward. Two Ways To Run A Job 1: Haul it yourself -> Load at the pickup, tip at the destination. Progress moves as you tip. 2: Hire a driver -> Hands the route to the base game AI as a Load & Deliver job. Per-Truck Books The base game only keeps farm-wide statistics. This tracks every truck separately. Company Ledger Revenue, driver wages, fuel, distance and job count for the company as a whole, followed by a history of every finished and expired contract, newest first. Company figures are tracked separately from the fleet on purpose; a load you tip yourself cannot be pinned to a specific truck, because the station reports liters and a position, never the vehicle that delivered them. Dispatch Office Four tabs in the in-game menu, built from stock FS25 menu widgets so it looks and behaves like the rest of the game. Version 1.3.1.0: * A couple of usability improvements for running your transport business * Dispatch is now hidden until you have a headquarters, so it stays out of the way early on * New contract type toggle so you can filter the kinds of contracts you take * No save migration needed. Existing saves load as normal

Tax Mod v 1.1.6.0

Adds realistic tax system to your farm. Features: Daily tax deductions based on farm balance Monthly tax returns (percentage of taxes paid) Three tax rate levels: Low (1%), Medium (2%), High (3%) Configurable minimum balance threshold Tax history and statistics tracking Professional in-game notifications Fully configurable via console commands Multiplayer compatible Settings saved per savegame Type ‘tax’ in console for commands Please be aware: You need to have developer mode enabled in order for you to open the console. This can be done in your FS game folder, then look for the “game.xml”. Change developmentcontrols to “true” Enjoy you farming experience with my Tax Mod 3 Version 1.1.6.0: * Same tested build as the brief 1.1.5.60 release, with a corrected version number * A settings save during load could abort the game load with the full suite installed, that is fixed * Cleared the HUD toggle default key binding so it ships clean * Economy scaling now follows the shared difficulty options * HUD styling and layout improvements * No save migration needed. Existing saves load as normal

Wielton Bulk Master Trailer v 1.4

Combination: Truck, Dolly Price: 85000.00€ Capacity 62000L Brand: WIELTON Category: trailers Added license plate Added FS25 Colors Version 1.4: * ModDesc changes * DescVersion changed * Version changed

Ford Escort RS Turbo 1986 v1.0

Characteristics: – Selectable Body color. – Selectable Interior color. – Selectable Rim color. – Selectable Caliper color. – Supports license plates. – Interactive Control Support. – Price: $32.000 – Engine: 1.6L I4 Turbo 132HP , 206KPH. Custom Sound.

2022 PETERBILT 567 V1.0

W900 dump matching pup V1.0

This truck was based off a model only reason releasing it as is is bc i have to focus on getting other payed mods out hope you enjoy the mod only has bed option and compacity option danilo209 PierceCustomGaming and ReddogDD38 for the beds

Timpte Trailer pack V1.0

Timpte 42ft-50ft slope and flat nose trailers bulk filltype so everything can be loaded no collisions on the end they were causing problems when turning

Vermeer MS905 Manure Spreader V1.0.0.1

Vermeer-inspired version of the Oxbo AT5105 DNMS Manure Spreader from GIANTS Software in FS25. NOTE: This is a “fictional” machine, meaning it doesn’t exist in real life. The brand is real, but the machine itself and the model name are both fictional. Notable changes from the original machine: Changed brand, colors and decals from Oxbo to Vermeer Changed model name to somewhat match real nomenclature of Vermeer equipment Disabled the liquid manure configuration (LNMS) as Vermeer doesn’t have any liquid manure equipment Changed engine sound (using the AT5104 engine sound from FS22) Changed GPS sounds (using Deutz sounds) Added functional work camera pointing down into the manure box (for visualizing how much manure you have left) – requires the “Mercedes-Benz Trucks Pack” DLC to function, otherwise the camera area on the screen will be blank. Blacked out the red/white EU reflectors and added SMV triangle to the rear Added rim color configurations Made manure dischargeable Added machine to fertilizing contracts (large fields only)