AutoDrive for the map Bergblick V1.0.5
AutoDrive course for Bergblick (v1.0.5, May 2, 2025). All routes have been driven, including farms, production facilities, sales points, the biogas plant, and field edge courses. For small/medium vehicles. Cornering speed: 60%. With legend and tips. AutoDrive course for Bergblick (v1.0.5, May 2, 2025). All routes include farms, production facilities, sales points, the biogas plant, and field edge courses. AutoDrive course for the “Bergblick” map, version 1.0.5 from May 2, 2025 This course was created with AutoDrive 3.0.0.6 Areas covered: Two- and single-lane roads Field roads as secondary routes Production and sales points Biogas plant Two farms Field edge routes as secondary routes Legend for waypoints: < = Unloading in silos/production facilities > = Loading trailers = Loading/Unloading (man) = Manual loading/unloading (F) = Destination point in the field EK = Purchasing point VK = Selling point (Solo) = Use without implements or trailers Pal. = Pallets Bal. = Bales RWD = Reverse (Gate) = The gate must be opened (Z) = Field is fenced Notes on use: Set cornering speed to 60% Select the nearest field exit for the hauler Small to medium-sized vehicles recommended, as some production and sales points are very narrow Tested with: Steyr Absolut 6280 CVT and Fliegl ASW 271 Fendt 728 Vario and two Brantner Z 18051/2 XXL Power Flex Steyr Absolut 6280 CVT and Kaweco Profi II + Bomech Multi Profi 21/15 Lindner Lintrac 130 and Lizard MKS 8 Mercedes-Benz Actros L 1863 with Krampe SKS 30/1050 (not recommended) Tested with: Fendt 5275 C SL and Fendt FreeFlow 25 FT Steyr Absolut 6280 CVT and Fliegl ASW 271 Fendt 728 Vario and two Brantner Z 18051/2 XXL Power Flex Folder structure of production and sales outlets: 04.01 = KVA = Potato Processing Plant 04.02 = GTM = Grain Mill 04.03 = SPN = Spinning Mill 04.04 = ZKF = Sugar Factory 04.05 = SGW = Sawmill 04.06 = KSF = Canning Factory 04.07 = ZMW 1 = Cement Plant 1 04.08 = ZMW 2 = Cement Plant 2 04.09 = BAK = Bakery 04.10 = MGH 1 = Medium Greenhouse 1 04.11 = MGH 2 = Medium Greenhouse 2 04.12 = GGH 1 = Large Greenhouse 1 04.13 = GGH 2 = Large Greenhouse 2 04.14 = FLR = Butcher Shop 04.15 = MLK = Dairy 04.16 = BGA500 = 500kW Biogas Plant Notes: For the “Farmhouse 2” and “Farmhouse 3” sales points, fields 50 and 51 must be purchased. The wedge silos of the BGA500 cannot be filled automatically because there is insufficient space in front of them. At Farm 2 (bale storage), the hall door must be opened. AutoLoad unloading is on the right, loading is on the left or can be done manually. At Farm 1, the workshop is accessible separately through the hall doors. The silo for seed/mineral feed can only be exited through the center of the hall. The middle lane must remain clear. Installation: To use the courses, start a new savegame or copy the file “AutoDrive_config.xml” into the savegame folder of the “Bergblick” map. Recommended Mod: Bergblick AutoDrive for LS25