Farming Simulator 22 mods
50,532 results- 15 per page
- 30 per page
- 45 per page
- 60 per page
-
See more per page
Bigger pages, fewer clicks - and no ads anywhere.
Go Pro
LS22 NF Marsch Map v2.1.0.0
Map 2.1. – NF march logo on PDA map and map preview loading screen – Map is now better compatible with the dynamic field prices mod (thanks to Marko for the tip) – Changed cake weight and oil pallets – Sorghum reinstated as chicken feed – Cows and sheep can now also be fed with alfalfa and alfalfa hay – Pig feed can now also use rye, spelled, and carrots – The Holstein cows give about 30% more milk – Collision on port building moved – Bridge to the island (field 78) widened by about 25% – Replaced old building next to an office building in the village – Moved containers on the cheese factory premises – Fixed missing wheat malt in l10n_en.xml – Alfalfa should have slightly better performance again – Rye now grows a little taller – Ramps at Raiffeisen so that vehicles get stuck less – Added a small missing field corner at Fed 31 – Field 53 on the dyke smoothed out a bit – Lavender can now be harvested with Thresher and Corn Head again – Removed superfluous traffic sign next to the campsite – Earth can also be sold again at the nursery – Diesel prices were slightly reduced again – Fixed floating car at a gas station – Fixed water plane at fields 57 and 80 – Water plane moved to the south so that it can also be placed better on field 81 Typical North German landscape in North Friesland. We have dykes here, ditches around the fields, and the fields are mostly square. The land was reclaimed from the North Sea by dikes over the past few centuries courtyards There are no ready-made courtyards, everyone can creatively design their own courtyard according to their personal preferences. There are a few large spaces available for this. A few halls and a workshop are attached to the map fields then forest On the NF March there are 79 fields with , from 0.8 ha to 95 ha, everything is there, average field about 12.8 ha and the total area of all fields is a little over 1000ha of which about 140ha are grassland Forest area There are more than 150 hectares of forest with countless trees, most of which are also suitable for the wood harvester. Fruit In addition to the standard fruits, rye, spelt, triticale and millet are now installed on the map, There are other types of filling on the map: earth, sand and gravel Earth in the ditch In the ditches you can find earth in many places on the map, which you can dredge and sell with an excavator, then there is the sand, gravel, earth area where there is a lot of material to excavate and load points of sale If you harvest a lot, you also have to sell a lot. There are a total of 16 different sales outlets at the NF March 4-fold, including Raiffeisen, Port, train station but without a train, the depot, grain trade and grain AG At the train station and at the Raiffeisen, you also have the option of buying seeds, fertiliser, Lime, mineral feed, herbicides and liquid fertilizers For pallet goods there are the sales possibilities Lidl, Aldi, Edeka, the stadium, the hardware store and the spinning ball can be sold at the garden center and straw at the thermal power station, there is also a sales station for wood the sawmill, milk goes to the dairy (no production) Vehicles are bought from vehicle dealers and animals from local pet shops If you leave your vehicle on the field without diesel, electricity or methane, there are 3 filling stations 2 of which are also equipped with charging stations The card also has 2 large biogas plants which can be bought and operated Collectibles On the NF Marsch Mod Map there are 3 different collectibles to search for. This includes 10 pairs of Shelly shoes, 30 FA gold coins and 78 NF march pallets For all collector’s items, there are shelves at the vehicle dealer that fill up when the items are found. There is also a bonus when you find all objects in a category If someone cannot find all the objects themselves, there are suitable help videos on my YouTube channel in which I show all the hiding places of the shoes, coins and pallets. Support area The shop area also serves as a big thank you to the numerous supporters of the NF Marsch. We have listed the active YouTube channel members and the Twitch Subs they have made themselves In addition, there are on the map 78 lovingly and detailed designed plots on which the Farmer, Squire, and Twitch Subs level 3 channel members can move in. It got crowded on the march and we can’t say thank you enough for your great support. And once you have moved in, you can have your property individually designed with various decorative objects Windmills It is windy on the North Frisian Marsh and a long-term investment in wind turbines can be worthwhile. The wind turbines installed on the map are practically only decoration and can be used after you have bought the land has to be demolished and replaced by the NF Marsh Windmill Fruit symbols All fruit symbols have been revised and no longer look so comic-heavy from missions Many XXL missions thanks to the map size and the number of fields ground textures With a total of 18 different ground textures, everyone can design their yard and surroundings to suit them Conclusion Overall one can say that the NF March has changed compared to the last LS parts further developed and has been extensively revised and beautified.
LS22 Mazowszany Map v1.2.0.2
Welcome to Mazowszany. This is a Polish map with modern Polish climate from FS19. Changelog 1.1.0.0: – Added support for consoles – Farms maked into placeables farms – Unlocked the part of the map – Changed grass – Fixed visual bugs Changelog 1.2.0.0: – Added much visuals changes – Fixed lime texture Changelog 1.2.0.1: – Fixed visual bug Changelog 1.2.0.2: – Fixed visual bug The map includes: – 2 playable farms – 55 fields – Shop with workshop – 8 sell points – Biogas Plant – Sawmill – Collectible items – Free water in well
ZDT NSPV Galan Pack FS22
The trailers are characterized by a low loading area with large dimensions for the transport of piece loads such as wood, lumber, crates of fruit or vegetables, they are also suitable for the transport of bales of straw or hay. PV15 Galan: Max Speed: 40 kph Price: 10.500 $ Features: - Capacity of 32 round bales with a diameter of 1.2 meters - Large loading area with large dimensions - Tension belts support - Optional bale barriers - Color configuration NS11 V Galanek: Max Speed: 40 kph Price: 5.500 $ Features: - Capacity of 22 round bales with a diameter of 1.2 meters - Tension belts support - Color configuration
Schlüter 2500 VL v1.0.6 – FS22
Schlüter 2500 VL v1.0.6 – FS22 Here is our Schlüter variant, which has been hanging in the ModHub since December 3rd, 2021, and has not been activated. Actually, the idea was to make this Schlueter available to console players in the ModHub. But unfortunately it doesn’t pass the “quality control”. Version 1.0.6.0 A lot was done again Leo630 cut out and animated the front and rear windows, I added sounds underneath Leo630 also gave him handles for the doors The old lighting was removed in the 3d program and brought completely to LS22 standard. Visually, small accessories were added, wheel chocks and a new checker plate on the steps, and he got new fanfares Added another steering type, now has all-wheel and front steering to choose from The rear jack was fixed so that it lifts when trailers are coupled below (trailerLow). What was actually done: Converted from the 19s The left door was animated and can be opened and closed using MouseControl — the “quality control” wasn’t enough Added foot animation — Was criticized that there was none before. Config RUL, left or right, bilateral Built-in key animation when starting the engine – Thanks to farmerfivetom who created the key for it in Blender Sound from the Case IH Magnum 7200 Pro Series installed Powershift transmission installed MotorConfig 2500 TVL Standard with 253 hp and a 16-speed powershift transmission, Vmax 44 km/h MotorConfig 2500 TVL tuning with 280 hp and a 17-speed powershift transmission, Vmax 49 km/h MotorConfig 3500 TVL tuning with 325hp and a 17-speed powershift transmission, Vmax 49 km/h GPS EZ Guide 250 will appear when using Wopster’s GPS (Guidance Steering version 2.1.0.0 or later is required) Front hydraulics optionally selectable in the shop Indoor cam and indoor sound brought to 22 standard Simple IC installed Animated front and rear windows Installed handles for the doors The complete lighting converted to LS22 standard small optical changes Door animation with sound Fixed rear lifter on trailers with the Attacher trailerLow Added steering types, all-wheel steering, and front steering Replaced the old fanfares with new ones I hope I haven’t forgotten anything and that you like it.
Claas Rollant 250 v1.0 – FS22
Claas Rollant 250 v1.0 – FS22 Added Netwrap on. Need to use netwrap addon mod to make that work. Also wide out the wheels.
Anderson Group TSR3450 v1.0 – FS22
Anderson Group TSR3450 v1.0 – FS22 Configuration built in for choice of hitch or ball hitch Because Postboer66 didn’t like that the Anderson at the Schlueter was too high up on the hitch. He rewrote the attacher to trailerLow, but then he would no longer be usable for other tractors. That’s why I gave him a config now, so you can always change. So you don’t need 2 different mods and you adapt the Anderson to the tractor.
VALTRA G TGAMER V1.1
#gallery-1 { margin: auto; } #gallery-1 .gallery-item { float: left; margin-top: 10px; text-align: center; width: 20%; } #gallery-1 img { border: 2px solid #cfcfcf; } #gallery-1 .gallery-caption { margin-left: 0; } /* see gallery_shortcode() in wp-includes/media.php */ Little valtra with a lot of IC functions Hi, here is the coming back of my Valtra G from FS19 readapted to FS22 with upgrades in programs: – 3 different light type – 3 different beacon with each having 5 different lightning and also available in orange or chrome or black chrome so in total 45 differents configs – add of the Agrimax RT657 BKT tires and of course it have the simpleIC with a lot of command like: doors/windows/hood/mirros/steering console/armrest. and now light angle can be adjust with simpleIC too. Changelog: + change on V1.1.0.0: add of the german translation add more function to the simpleIC, now the light angle can be controlled add of a full black config Required mods Simple IC Credits: Thierry Gamer 5/5 - (4 votes) Download mod File File size FS22_TGamerValtraG 19 MB
FS22 Fed Mods Pack v1.7.0.0
FS22 Fed Mods Pack v1.7.0.0 Mod Pack 1.7 – Increased transfer speed from liquid storage – Fixed ball bearing wood chip display flickering better late than never. This is now my FED Mod Pack. The package is a summary of all placeable mods from me. The Fed Mods package currently consists of 6 multi silos with bale reception + 4 extension silos Lime station for purchasing and storing lime, e.g. at the farm Plant protection station for purchasing and storing herbicides, e.g. on the farm Direct sale of wood for the simple sale of logs More mods will follow in the next weeks/months. Have fun with it Credits:Idee / Konzept: FedAction Tags: Mod Packmods
Fed-Mods-Paket v1.7.0.0
Fed-Mods-Paket v1.7.0.0 Mod-Paket 1.7 – Erhöhte Übertragungsgeschwindigkeit von der Flüssigkeitslagerung – Das Flackern der Anzeige der Kugellager-Hackschnitzel wurde behoben besser spät als nie. Das ist jetzt mein FED Mod Pack. Das Paket ist eine Zusammenfassung aller platzierbaren Mods von mir. Das Fed-Mods-Paket besteht derzeit aus 6 Multisilos mit Ballenaufnahme + 4 Erweiterungssilos Kalkstation zum Einkaufen und Lagern von Kalk zB auf dem Hof Pflanzenschutzstation zum Einkauf und zur Lagerung von Herbiziden zB auf dem Hof Direktverkauf von Holz für den einfachen Verkauf von Rundholz Weitere Mods werden in den nächsten Wochen/Monaten folgen. Viel Spass damit Tags: Das PaketErweiterungssilos KalkstationHof PflanzenschutzstationViel Spass
Case IH Puma CVX 2016/2020 (Simple IC) v1.0 – FS22
Case IH Puma CVX 2016/2020 (Simple IC) v1.0 – FS22 Specifications: – Price: from 147.000 – Power: 170-245HP – Max Speed: from 55km/h / 34mph – Multiple Wheel brands (Trelleborg, Michelin, Continental, Mitas, BKT, Verdestein, Nokian) – Multiple Wheel types – Addtional Controll Panel – Two Types of Chase 2016 & 2020 – Three Exhaut Pipes (Standard, Stainless Steel, Chrome, Gold) – Front loaders – Hazard lights – Front fenders – Front Guards – Multiple colours (body and wheels) – Warning signs (left + right) – Multiple external designs (additional lights, trumpets, mud guards) – Carpet (Simple IC controlled) – Engine setups (Puma 150 CVX, Puma 165 CVX, Puma 175 CVX, Puma 175 CVX+) – English/German translations Simple Ic: – Left & Right door – Roof – Back window – Steering Wheel console – Side signs – Right Controll Panel – Passanger Seat – Carpet
Jenz HE 561 StA BETA – FS22
Jenz HE 561 StA BETA – FS22 Produce wood chips out of logs. You have to enter the machine in order to use it. Price 15500$
Claas Rollant 250 FS22
Here is a little edit of the Claas Rollant 250. - Added Netwrap (need to use netwrap addon mod to make that work). - Wide out the wheels. Price: 25000€ Needed power: 98 HP Round bale diameter: 125 cm Pick up width: 2 meters
Bourgault 3320 & 7950 v1.0 – FS22
Bourgault 3320 & 7950 v1.0 – FS22 – Inverted tires on both implements – Rim colour choice on Air Cart – Activated animation of Bulk Boom arm on 7950
Bourgault XR770 v1.0 – FS22
Bourgault XR770 v1.0 – FS22 Edited to be a cultivator Tires inverted Price: 59.500 € Working width: 21.3 – 27.4 m Required power: 350 hp Max. working speed: 12 kph.
JOHN DEERE 7000 & 7010 LARGE FRAME V2.0
#gallery-1 { margin: auto; } #gallery-1 .gallery-item { float: left; margin-top: 10px; text-align: center; width: 20%; } #gallery-1 img { border: 2px solid #cfcfcf; } #gallery-1 .gallery-caption { margin-left: 0; } /* see gallery_shortcode() in wp-includes/media.php */ Another John Deere 7000 & 7010 series large frame. A tractor that have been recreated multiple times now in the farming simulator game and there is an other variant of it! !!!WARNINGS!!! -Demco tanks mount and Degleman silage mount are under the Frontloader configurations. -I am aware that the Degleman mount can be bought at the same time as a front weight config. I just trust you not to report that as an issue. Othewise you could of bought a front loader bracket when a part of the blade would be mounted at the same place on the frame rails and that would of been also unrealistic! -I also suggest not to use the fenders configuration when using the demco tanks. the fenders will clip through the tanks when turning. What I have done as 46mods to that mod is: -Fixed errors. has a clean log so far in my testing. -Complete wheel configs overhaul. (Stopped myself cause I could of made more) -Modeled a new front loader sheild and steps. -Modeled demco mounts specific to the MFWD 7000 Deeres -Set up mounts for Demco tanks and Degleman silage blade. -New John deere stickers (Thanks to Ross.W for reference pictures for the 7000 and my friend Pier-Luc Pelletier for the 10 series ones) -More minor adjustments, modifications. Related mods: –Demco Tanks –Degleman Silage Blade Models: -Sotillo (Original model) -Knagsted (2WD front axle beam) -Ross W. (Making EU model US Spec) -Custom Modding, Casearias (Tires, rims) -Rooster Mods (Wide Front axle UDIM, Updated rear fenders) -Puma (Quicke frontloader mounts) -WadeMitch Modding and Edits (Front grill, lights, exhausts) -OS Farms (Degleman silage blade mount) -46Mods (Frontloader shield. Steps, Demco tanks mounts) Textures: -Sotillo (Original textures) -Ross.W, IPF Brandyman (UDIM) -46Mods (New 7000/7010 stickers) -OS Farms (Spec map on demco mounts) FS22/GE engine edits: -Diniz Farms (FS22 convert, MFWD edit) -Zichner99 (MFWD edit) -46Mods (GE file cleanup and overhaul, still not perfect but it got better) Credits: IPF/Ross W./Brandyman – Conversion FS 19: Toymatao – MFWD Edit: Diniz Farms – FS22 upgrades:WadeMitch Modding and Edits, Rooster Mods, 46Mods. 5/5 - (3 votes) Download mod File File size FS22_JohnDeere_7000_7010_Series 141 MB
- 15 per page
- 30 per page
- 45 per page
- 60 per page
-
See more per page
Bigger pages, fewer clicks - and no ads anywhere.
Go Pro