SnowRunner mods
2,775 results- 15 per page
- 30 per page
- 45 per page
- 60 per page
-
See more per page
Bigger pages, fewer clicks - and no ads anywhere.
Go Pro
Loadstar frame 2.4
***UPDATE*** Before updating, make sure you sell your current loadstar in game or it will disappear and you’ll lose your money. I fixed the mod so now just subscribe at the top right and activate at the main menu **If you are having trouble updating, first unsubscribe and then go to DocumentsMy GamesSnowRunnerbaseMods.modiomods and delete the numbered folder with Loadstar_modded_unlocked_differential Then resubscribe and it’ll work 2.2 Added customization presets and lowered the front end a bit on the upgraded suspension 2.1 Fixed front suspension sticking out 2.0 2 more suspension heights Loads of new tires and now including 45″ + 49″ tires. Adjusted the semi-trailers to be a tiny bit higher and back when using the crane (was getting stuck when doing 90 degree turns) Added scout roof rack Adjusted offroad gear box to have 2 more speeds and more power in reverse. Hey there, first mod that I’ve worked on for Snowrunner so let me know what you think. I made a few edits in the xml file to improve the Loadstar and make it able to now tow things. -fuel capacity to 225 -mass increased from 2000->2500 -differential unlocked (for sharper turns) -added low and high saddle -added sideboard and flatbed I didn’t change the mass too much because I still wanted to keep it light for a scout car. Because of this, it can tend to pop a wheelie when towing semi trailers. To avoid this I deploy my crane so that the center of mass is over the front of the truck(Imagine a scorpion). I didn’t want to keep the sideboard and flatbed addons since they make the back end so heavy but I left them in anyway. 6 Nov, 2023 21 Jul, 2020 29 Jul, 2020
K2500HD Conversion V1.1.2
K2500HD Conversion V1.1.2 V1.1.2 quickfix to gearboxes.xml for an error ***THIS IS A SUBSCRIBE TO INSTALL MOD*** Standard K1500 with the following upgrades: 1. 3 Duramax Engine Options; LMM(365hp,660ft-lb), LML(397hp,765ft-lb), and LP5(445hp,910ft-lb). 2. 3 Genuine Transmission Options; 1 10-speed and 2 6-speeds. 3. Fully locked differentials. 4. Super Heavy Mud-tires and Chain-tires in 3 sizes, 35″ – 38″ – 44″. 5. 3 Lift kits, 1.5, 2.5 and 3.5. The Weight of the truck has also been increased, the sounds have been changed and a few other minor enhancements have been included. Easily one of the best scouts as a result of the upgrades, so the pricing in game reflects its capability. – Change Log – 1.0.0 – Initial Release 1.0.1 – added paint options 1.0.2 – fixed error in code 1.0.3 – changed 43″ tires to 44″ tires 1.0.4 – added mass to truck, tuned suspension further, reduced power of L5P for balance 1.0.5 – fixed a small error in 1.0.4 1.1 – added 1 new engine and 1 new transmission; lowered prices, lowered engine power, better gear ratios, more challenging fuel rates, and better suspension; added (small) rank requirements for larger tires and lifts. 1.1.1 – quickfix to adjust some UI descriptions, and readjust fuel rates, once again. 1.1.2 – quickfix to gearboxes.xml for an error Standard install rules for MP/Co-op.
Pacific P12 Army Truck V1.0.1 Mod
Pacific P12 Army Truck V1.0.1 Mod V1.0.1 Try to fix load issue Changes: Full time AWD Full time diff block Added set of big wheels Added high suspension Added snorkel Added big chained wheels Added all carriage Added low semitrailers (there are can be unuseful with high suspension) Added all cranes Changed some color schemes Changed exhaust All others are default Subscribe to install or install manually.
CK1500 Monster Edition V1.3.3
CK1500 Monster Edition V1.3.3 V1.3.3 Added: 2 New Transmissions High Range And a Secret One Added: Different Exhausts Added: New Secret Engine Adds More Custom Engines, Fully Custom Gearboxes, Extremely Big And Stupid (102″) Tires and Custom Lifts For The Vanilla Chevrolet CK1500 Note: Make sure you backup your files before you replace them! Note: Subscribe to install may not work! installation: Simply extract The zipped folder into for example your desktop and then put the folders from the zipped folder into (Install Directory)>SnowRunner>en_us>preload>paks>client Then open initial.pak with WinRAR>>classes Leave comments about errors or problems and i’ll try to fix them!
K1500 Ultra 1.5.1 Mod
K1500 Ultra 1.5.1 Mod V1.5.1 Minor tire tweaks I wanted a truck that could go through deep mud figured I would share. Added a 3rd higher suspension and 43″-44″ tire options to the stock K1500. Fuel tank bumped to 120 and added all US scout engines. Can use medium winches and now can attach regular trailers you can try its hard when there full they weigh way more then the truck. But in a pinch it might be what you need. More color options, exhaust stacks and heavy duty offroad bumpers. *5/9/20 Updated to 1.0.3 Adjusted fuel economy exhaust stacks produce taller smoke column and small tire tweeks *5/8/20 Updated to 1.5 added more tires, 2 front and 1 rear bumper. Tweaked tires and trailer attachment point for better alignment. *5/7/20/ Updated to 1.4.2 added more paint, exhaust stacks and you can now remove bumpers.
BAZ-5921/5922 beta V2.1 Mod
BAZ-5921/5922 beta V2.1 Mod V2.1 interior fix in 5921 Conversion of a transport-loading vehicle TZM 9T218 (BAZ-5921/5922) of the Soviet operational tactical missile system Tochka. 4 cars are in fashion. Cars can walk on rivers and other bodies of water, to launch all-wheel drive it is enough to turn on all-wheel drive, to save fuel on a hard surface and swamp it is recommended to turn off all-wheel drive.
True Long Winches 2x V1.0.2 Mod
True Long Winches 2x V1.0.2 Mod This mod Just changed length to x2, no change in strength, Just x2. open or unzip this mod using winrar (winrar is free software from rarlab.com) Backup the initial.pak file ( located in SnowRunneren_uspreloadpaksclient ) open initial.pak with winrar In winrar you should now see a folder Drag the folder from my mod into winrar and hit OK on the window that pops up.
KrAZ CHR Truck V2.1 Mod
KrAZ CHR Truck V2.1 Mod In 1982, as part of the development of the promising Otkrytie family of military vehicles with a classic layout, the Kremenchug Automobile Plant built experimental models of two special 16-ton hoodless chassis – single and articulated, unified with KrAZ-260 vehicles and capable of carrying heavy army superstructures and artillery system. They had the designation of the Chechen Republic, which was unusual for the plant, which meant “one-time drawing”, and represented a parallel alternative family designed to test fundamentally new layout schemes and assemblies, to compare performance and new design solutions. However, in terms of their parameters and capabilities, these cars were already closer to road trains than to single trucks. CHR-3130 (1982 – 1985) – a cabless truck with two front steered axles, a continuous frame and a special massive non-folding cab of a high location. It was based on the KrAZ-260 truck cab without an engine compartment and plumage, in the front of which a cooling radiator was rearranged. An experimental multi-fuel engine YaMZ-8421 V8 (17.24 l, 360 hp) was installed behind it with a turbo-supercharging and intermediate air cooling, partially entering the cabin and adapted to work on diesel fuel, gasoline, kerosene or their mixtures with rocket fuel . A new 10-speed gearbox YaMZ-202, the main units from KrAZ-260 and a 6.5-meter onboard platform with an awning were mounted by car. The original details were a new elongated spar frame of channels with amplifiers and a second steered and drive-through bridge. In the process of factory and military tests, the car mounted standard wide-profile tires 1300×530 – 533 from cargo “craz” or arched Y-186 with a diameter of 1300 mm and a width of 750 mm, which ensured patency at the level of tracked vehicles. It is quite natural that such an unusual, massive, heavy and expensive construction, requiring huge expenses for the organization of special production and maintenance, scared the military away. At the end of 1982, KrAZ-CHR-3130 cars were submitted for consideration by the military. In the future, the KrAZ-6316 car “grew” out of the design of KrAZ-CHR-3130.
K1500 Ultra Cummins swap V1.0.3 Mod
K1500 Ultra Cummins swap V1.0.3 Mod Same as my K1500 Ultra but with only 1 engine a 4BT Cummins Turbo Diesel. Tried so hard to make this a engine option work with my other mod but you can’t have multiple engine sounds for one truck. *5/9/20 Updated to 1.0.3 Adjusted fuel economy exhaust stacks produce taller smoke column and small tire tweeks *5/9/20 Updated to 1.0.2 Fixed fuel consumption so you don’t run out so fast. *5/9/20 Updated to 1.0.1 Fixed bug with duplicate exhaust and bumpers.
Loadstar frame V2.3.1 Mod
Loadstar frame V2.3.1 Mod ***UPDATE*** Before updating, make sure you sell your current loadstar in game or it will disappear and you’ll lose your money. I fixed the mod so now just subscribe at the top right and activate at the main menu **If you are having trouble updating, first unsubscribe and then go to DocumentsMy GamesSnowRunnerbaseMods.modiomods and delete the numbered folder with Loadstar_modded_unlocked_differential Then resubscribe and it’ll work 2.2 Added customization presets and lowered the front end a bit on the upgraded suspension 2.1 Fixed front suspension sticking out 2.0 2 more suspension heights Loads of new tires and now including 45″ + 49″ tires. Adjusted the semi-trailers to be a tiny bit higher and back when using the crane (was getting stuck when doing 90 degree turns) Added scout roof rack Adjusted offroad gear box to have 2 more speeds and more power in reverse. Hey there, first mod that I’ve worked on for Snowrunner so let me know what you think. I made a few edits in the xml file to improve the Loadstar and make it able to now tow things. -fuel capacity to 225 -mass increased from 2000->2500 -differential unlocked (for sharper turns) -added low and high saddle -added sideboard and flatbed I didn’t change the mass too much because I still wanted to keep it light for a scout car. Because of this, it can tend to pop a wheelie when towing semi trailers. To avoid this I deploy my crane so that the center of mass is over the front of the truck(Imagine a scorpion). I didn’t want to keep the sideboard and flatbed addons since they make the back end so heavy but I left them in anyway.
BAZ-5921/5922 beta 2.1
Conversion of a transport-loading vehicle TZM 9T218 (BAZ-5921/5922) of the Soviet operational tactical missile system Tochka. 4 cars are in fashion. Cars can walk on rivers and other bodies of water, to launch all-wheel drive it is enough to turn on all-wheel drive, to save fuel on a hard surface and swamp it is recommended to turn off all-wheel drive. 15 Oct, 2020 25 Nov, 2020 3 Dec, 2020
Loadstar frame 2.3.1
***UPDATE*** Before updating, make sure you sell your current loadstar in game or it will disappear and you’ll lose your money. I fixed the mod so now just subscribe at the top right and activate at the main menu **If you are having trouble updating, first unsubscribe and then go to DocumentsMy GamesSnowRunnerbaseMods.modiomods and delete the numbered folder with Loadstar_modded_unlocked_differential Then resubscribe and it’ll work 2.2 Added customization presets and lowered the front end a bit on the upgraded suspension 2.1 Fixed front suspension sticking out 2.0 2 more suspension heights Loads of new tires and now including 45″ + 49″ tires. Adjusted the semi-trailers to be a tiny bit higher and back when using the crane (was getting stuck when doing 90 degree turns) Added scout roof rack Adjusted offroad gear box to have 2 more speeds and more power in reverse. Hey there, first mod that I’ve worked on for Snowrunner so let me know what you think. I made a few edits in the xml file to improve the Loadstar and make it able to now tow things. -fuel capacity to 225 -mass increased from 2000->2500 -differential unlocked (for sharper turns) -added low and high saddle -added sideboard and flatbed I didn’t change the mass too much because I still wanted to keep it light for a scout car. Because of this, it can tend to pop a wheelie when towing semi trailers. To avoid this I deploy my crane so that the center of mass is over the front of the truck(Imagine a scorpion). I didn’t want to keep the sideboard and flatbed addons since they make the back end so heavy but I left them in anyway. 18 May, 2020 9 May, 2020 10 May, 2020
Stronger crane for US 1.0
a lot more stable and a lot more weight on it only use on the big heavy duty trucks the anchors push up the back end now C:Program FilesEpic GamesSnowRunneren_uspreloadpaksclient inital.pak/media/classes/trucks/addons replace big_crane_us.xml change inital.pak to .zip to open the rest of the files then swtich to back to .pak and game will be fine works in MP 15 Jun, 2020 22 May, 2020 13 May, 2020
Grandma Visit V1.0 Mod
Grandma Visit V1.0 Mod Reskin of texture for safely visit of grandma. Just for fun.
K2500HD Conversion 1.0.5
***THIS IS A SUBSCRIBE TO INSTALL MOD*** Standard K1500 with the following upgrades: 1. 2 Duramax Engine Options; LML, and LP5. 2. 2 Allison Transmission Options; 10 speed and 6 speed 3. Fully locked differential 4. Super Heavy Mud-tires and Chain-tires in 3 sizes, 35″ – 38″ – 44″ 5. 3 Lift kits, 1.5, 2.5 and 3.5. The Weight of the truck has also been increased, the sounds have been changed and a few other minor enhancements have been included. Easily one of the best scouts as a result of the upgrades, so the prices reflect its capability. Changelog – 1.0.0 – Initial Release 1.0.1 – added paint options 1.0.2 – fixed error in code 1.0.3 – changed 43″ tires to 44″ tires 1.0.4 – added mass to truck, tuned suspension further, reduced power of L5P for balance 1.0.5 – fixed a small error in 1.0.4 Standard install rules for MP/Co-op. 9 Jul, 2025 16 Aug, 2021 3 Sep, 2023
- 15 per page
- 30 per page
- 45 per page
- 60 per page
-
See more per page
Bigger pages, fewer clicks - and no ads anywhere.
Go Pro