Farming Simulator 19 mods
55,721 results- 15 per page
- 30 per page
- 45 per page
- 60 per page
-
See more per page
Bigger pages, fewer clicks - and no ads anywhere.
Go Pro
Fortschritt T157-2 v1.0.0.0 FS19
Fortschritt T157-2 v1.0.0.0 FS19 – Power: 50 h/p – speed: 20 km/h – choice of color (2) and design – bucket capacity: 1000 l – pitchfork capacity: 1000 l – tow hitch – light Credits:Tatra148, ADOLF
TIH 445 Bagger v1.0.0.0 FS19
TIH 445 Bagger v1.0.0.0 FS19 – Power: 50 h/p – speed: 20 km/h – bucket capacity: 1500 l – pitchfork capacity: 1500 l – tow hitch – light Credits:Sdfkz and ion.Vasi, ADOLF, OSTMODDING-FREUNDEN
Hardi Interactive Sprayers v1.4.0.0 FS19
Hardi Interactive Sprayers v1.4.0.0 FS19 This is a package of Hardi sprayers, which can be found in the original FS19. These sprayers can pump the liquids back and forth. This works just like the interaction of slurry barrels in the original game. Also, unloading at storages for liquid fertilizers and herbicides works. + charge and discharge to other devices in this package + discharge at storages for liquid fertilizers or herbicides + color choice for base, details and rims with all colors of the known manufacturers + the sprayers also interact with the HS 8 Sprayer Support Trailer ++ unloading on pallets is disabled in the default configuration, but can be turned on again in the workshop or directly at the time of purchase Changelog 1.4.0.0 + bug of the helper at the headland fixed – now works the entire field, if there are no obstacles at the edge of the field Required Mods: – Fertilizer Tanks (By: VertexDezign) – HS 8 Sprayers Support (By: Holger Sengstock) Credits:Holger Sengstock
Ponsse Scorpion King – MRF Edition v1.0.0.0 FS19
Ponsse Scorpion King – MRF Edition v1.0.0.0 FS19 Cutting lengths up to 25 meters in 0.5m increments Process head tiltable and control for gripping retrofitted Optimized for strong wood H7 processor logo Various tire choice and 20% wider Real Boggieachsen installed Original Ponsse rear protection More light installed Optical Sun Shades Per Cover Animation Entry and exit points at the front of the ladder –PC mostly controlled by N key– Color choice for vehicle and rims For PC players only: Manual cutting addon Ready Credits:MR-Forsttechnik
Lizard SunCut Pack v1.0.0.0 FS19
Lizard SunCut Pack v1.0.0.0 FS19 Lizard SunCut Width: 5,7m Needed Power: 180HP Price: 22500 & 12000€ Game Farming Simulator 19 Manufacturer Lizard Category Header Trailers Author FSH modding Size 3.48 MB Version 1.0.0.0 Released 06.12.2019 Platform PC/MAC, PS4, XB1 Credits:FSH modding
Sussex Farms v1.0.0.0 FS19
Sussex Farms v1.0.0.0 FS19 Welcome to Sussex Farms, This map is based on similar areas in and around Sussex UK. This map has many farms with enough places/areas to build your own. 3 farms have shared storages for seeds and fertilizers that need to be filled for later use of filling machinery. Included under misc. MKU8 and 32 Universal liquid tanker to help with filling certain storages. You have a few greenhouses on the map that need water and manure for an hourly pay-out, but also are linked to transport contracts with custom pallets. There are a few wooden sheds around the map where you can find various triggers for removing hedge collisions Etc. Free water and lime on map. Standard seasons support. I hope you enjoy this version of the map. Credits:ALiEN JiM
Wola Zabierzowska v1.0.0.1 FS19
Wola Zabierzowska v1.0.0.1 FS19 Welcome to Wola Zabierzowska! Big polish map for Farming simulator 19! On this map you will find over 200 fields and each of them is buyable seperatly. Map has Seasons mod compatibility. There are 4 farms, several sale points, 4 villages, traffic, pedestrian and much much more… Have fun! Changelog 1.0.0.1: – fixed compost loading trigger in BGA – fixed liquid manure loading trigger in cow stable – removed parked car from place for transport mission in sawmill Credits:zielak04
GlobalCompany – Potatowasher v1.0.0.0 FS19
GlobalCompany – Potatowasher v1.0.0.0 FS19 This Potato Washer can be used to clean potatoes to sell them for a higher prices. The washed potatoes can be sold at any selling station for potatoes and you get a 40% higher price. Can be filled by shovels or Grimme belt system. Price: 18000€ Output: 30000/h Required Mods: – GlobalCompany (By: LS-Modcompany / kevink98, aPuehri, Eribus) Credits:no.naim (LSMC), DerElky
Shamrock Valley 19 v1.0.0.0 FS19
Shamrock Valley 19 v1.0.0.0 FS19 Welcome to shamrock valley. This map is set in Ireland. Full seasons support with many extra features New grass textures cut grass texture and distance etc Custom ground textures Custom Wheat barley textures auther forgotten fruits 38 fields from small to medium 3 sell points Bga sawmill and other places Dof graphics has been removed to improve fps and distance blurryness. seasons Totally new lighting Engine More dramtic dawn and dusk lighting. better clouds and more vibrant colours Lots of animated objects to bring the map to life tractors in traffic boats planes etc Driveable boat around the bay I hope you all enjoy this map. Credits:Oxygendavid
Ferguson Pack v1.0.0.0 FS19
Ferguson Pack v1.0.0.0 FS19 The Ferguson TE20 was first introduced to the British market in 1946 to 1956 and was made in the Standard Motor Company factory in Banner Lane, Coventry, England. The first engine used in the tractor was an American Continental engine for 2 years, then it was changed to a Standard Petrol engine and labelled as the TEA20 (shown in the pack). Later in the manufacturing history, a petrol TVO/paraffin model was introduced in 1948 as well as a diesel model in 1951. There was 517,651 of many variations, such as narrow, vineyard and industrial, of the tractor manufactured in the 10 year period and many were exported all over the world. Including an extreme expedition to the South Pole by Sir Edmund Hillary in 1958. Ploughs: The Ferguson plough was one of the first implements made to fit the TE20 tractor, it revolutionised the agricultural world as we know it today with the TE20 and it’s famous 3 point linkage system. The Ferguson ploughs were originally made in 1, 2 or 3 furrow configurations, with the single furrow made for heavy ground or ground reclamation work. The most common 2 furrow plough was for standard work and a 3 furrow plough was offered for lighter soils and as a kit form for 2 furrow models, if farmer’s felt that their tractor could pull an extra furrow in certain ground conditions. In the pack, we include a 4 and 5 furrow model to go with the tandem tractor included as some farmers and dealerships, when they got larger tractors, decided to join ploughs together to suit their needs. The original purpose for the Ferguson TE20 was to make ploughing more efficient, easier and safer, compared to the machines of it’s day, so in the Ferguson pack we include the whole range of Ferguson ploughs. Sawbench: Ferguson was keen to show that the TE20 could do more than just ploughing and cultivation work and a good example of this is the Ferguson sawbench. This handy tool could be brought straight to the wood and start work immediately with only the touch of a lever, unlike previous sawbenches where you had to setup long dangerous belts. The first Ferguson sawbenches, with a model number of A-LE-19, had an angular blade guard, but still a considerable amount was open! And a later improvement in the guard was seen in the later A-LE-20 model with a round guard, which covered more of the blade, and improved design of the overall frame. Log Grab: A log grab was originally marketed alongside the Ferguson tractor for use in forestry applications, using the 3 point linkage to lift a part of the whole tree off the ground to reduce friction, therefore working faster and more productively. Banana loader: The Ferguson tractor was known for it’s advances in agricultural machinery of the time and one of them were the introduction of a hydraulically powered loader to shift manure, bales and anything else the farmer needed to move, lift or carry. Ferguson originally made a small loader (L-UE-20) mounted on the front axle, this loader was designed to be able to load manure from the shed/heap and into the Ferguson manure spreader, so it only could lift to 1.67 metres and could only lift 270kg. This is why it is sometimes referred to as the ‘teaspoon’ loader due to it’s restricted capacity. But, to aid farmer’s who needed to lift more and lift higher, Ferguson manufactured the high lift loader (M-UE-20), which is sometimes referred to as the ‘banana’ loader, due to it’s curved lift arms. This loader can lift 505kg to 3.35 metres and an ahead of it’s time feature, it has a hydraulic bucket/fork, instead of the trip mechanism commonly used on loaders at the time. Also, to improve traction and stability, a rear concrete weight was sold alongside the loader to counterbalance the load. This is the loader included in the Ferguson pack. 3 ton trailer: A general purpose trailer with a weight limit of 3 tons (3050kg) and a 2.75 cubic yard capacity was made to fit the Ferguson tractor in 1946 with a complicated 3 point linkage attachment system, commonly known as the Mark 1. Then in mid 1947, a more conventional ring type hitch was added, along with an ‘automatic’ pick up hook on the tractor lifted by the 3 point linkage, unlike the trailers of the time where you had to get off of the tractor and push in a pin, usually with heavy lifting involved of the trailer drawbar into the tractor’s clevis. The Ferguson trailer could be supplied as tipping or non tipping and had drop in sides with a fold down tailboard. The trailer has metal frame, chassis and a wooden floor and sides. Also, the trailer could be specified with grain sides, silage sides, and/or hay lades to be used all year round, this really is a multipurpose trailer. Pack List: Tractors: TEA 20 Standard: Price: 2500$, Max Speed 21.3 km/h, Power: 23.9 TEA 20 Halftracks: Price: 2800$, Max Speed 21.3 km/h, Power: 23.9 TEA 20 Tandem: Price: 4800$, Max Speed 21.3 km/h, Power: 47.8 Implements: Ferguson Shovel: Price: 120$, Capacity: 500 litres 3 Ton Tipper: Price: 650$, Capacity: 3000 litres Sawbench: Price: 240$ Back weight: Price: 120$, Weight: 500kg 1 furrow plough: Price: 100$, Width: 1m 2 furrow plough: Price: 170$, Width: 1.5m 3-5 furrow plough: Price: 250$, Width: 3.5m Log Grab: Price: 230$ Silage fork: Price: 150$, Capacity: 550 litres Pallet fork: Price: 70$ More implements coming soon! Credits:North Modding Company
FENDT FAVORIT 800 SERIES v2.0 FS19
FENDT FAVORIT 800 SERIES v2.0 FS19 FS19 Fendt Favorit 800 Series V2 So here again the revised version of the 800ers! Fendt: 816 818 822 824 824 Tuning IC Control cooling box New sound 1 and 2 generation Front loader attachment Credits:Michel Fischer auf Instagram
2014 Pickup with semi-trailer and autoload v1.2 FS19
2014 Pickup with semi-trailer and autoload v1.2 FS19 2014 Pickup with the following configuration options. Version 1.2 Added wooden pallets please read the description carefully main colour rim colour Paint for fender widenings Front ram protection colour Colour for the beacon strip on the roof Colour for roll bar and radiator grille saddle plate ram protection Nokian extreme tyres Trelleborg extreme tyres Engine variants with more power – in addition I used a beacon bar as well as speed cameras on vehicle and trailer unfortunately it doesn’t allow you to configure more than 6 colors in the shop right now there are also 2 trailers one under bale technique with autoload one under low loader The bale transport trailer has autoload for the following Pallets 8 pieces Square bales 15 pieces Round bale 1,3m 16 pieces Egg cartons 80 pieces Cotton bale 1 piece Mission pallets 8 pieces Board pallets 3 pieces the low loader can just transport vehicles.unfortunately this is possible with the tension belts sometimes and sometimes not The mod was built by Edwards Modding ( thx for that ) and I have installed the rest like color selection and autoload.after arrangement with him I may publish the mod IMPORTANT: I had to remove the script because it caused problems with the newer EAL script. so that the autoloader works you have to load this easyloadermod additionally. Credits:Modell: Edwards Modding / Pitbullix1Textur: Edwards Modding / Pitbullix1Script: alfalfa6945 / autoload ),Ifko ( addconfig ) ,GtX | Andy ( lightextensions)Idee / Konzept: Edwards Modding / Pitbullix1Tester: Pitbullix1 / Onkelbob
JOHN DEERE 6R SERIES v2.0.0.0 FS19
JOHN DEERE 6R SERIES v2.0.0.0 FS19 Price: 228.000 € Max. PS: 230/250 Max. Speed: 53km / h changes: Beacons configuration Mark Innenraumdeko new daytime running light new sound transparent grill with color configuration color selection Rim color choice with stroke Fronladerkonfiguration New in V2: IC installed Michelin tires installed in all versions License plate completely revised New sound with sound configuration installed (Thanks to Nastus for the sound and to Ifko for AddConfig) Prepared for the Agribumper mod from the Modhub Engine configuration based on the product brochure (as realistic as possible) Many configurations newly installed These include: Stag color (little deer on the hood) Exhaust “color” Flashing lights page Light color (with matching reallights) and much more, what you can find for yourself … Much has happened on this device. We hope that the time was worth it, that flowed into the works and that he likes you … And if not, you are not forced to use it … Credits:grushking94
Volvo FH16 2018 Pernilla holmboe v1.3 FS19
Volvo FH16 2018 Pernilla holmboe v1.3 FS19 Volvo FH16 2018 SLT Edit lantmanenfs, Adjust saddle with Mouse , Modell Pernilla holmboe Attable crane too the truck. the crane cannot be put on the car if the extra tank in options is selected. Credits:meistro und Team /Lantmanenfs/ tobias W Lantmanenfs New paint and crane and more
Colored Tools v3.0 FS19
Colored Tools v3.0 FS19 New Update for older Version or an description please check my other Mods Changelog: – Addet wood tools – Addet Belts Credits:Dor_Schmied2010
- 15 per page
- 30 per page
- 45 per page
- 60 per page
-
See more per page
Bigger pages, fewer clicks - and no ads anywhere.
Go Pro