Farming Simulator 19 mods
55,945 results- 15 per page
- 30 per page
- 45 per page
- 60 per page
-
See more per page
Bigger pages, fewer clicks - and no ads anywhere.
Go Pro
Tatra Phoenix T158 8×8 hooklift v3.0 Mod
Tatra Phoenix T158 8×8 hooklift v3.0 Mod Power, hp: 750 Fuel tank, L.: 440
Claas Lexion 8900 v2.0 Mod
Claas Lexion 8900 v2.0 Mod Power, hp: 790. Fuel tank, L.: 1150. Storage bunker capacity, L.: 18,000.
Mercedes-Benz Vito (W447) Polizei v2.0 Mod
Mercedes-Benz Vito (W447) Polizei v2.0 Mod Power, hp: 300. Fuel tank, l.: 64.
Grimme Tectron 415 v1.0.0.2 Mod
Grimme Tectron 415 v1.0.0.2 Mod Version 1.0.0.2 Dedi bug fixed Compatibility created with the trouser system from Wopster 2 hose brackets installed today I have the Tectron 415 converted by Christian Since I personally like to use it and I do not like the new potato harvester, I have reworked the 415 itself. I adjusted the headlamps and the taillights, they had to be shifted slightly and I converted the cat’s eyes into lights. The rear wheel was equipped with a so-called wheel hub. The front body now has more weight, as it has moved during transport practically in the wind. The weights in general have been adjusted. Should you possibly use the Fliegl low loader for transport, then I recommend to drive backwards upwards!
Construction objects FS19
Pack of building elements, will be perfect for TP players! Characteristics : - Price: 100 - 1.500 - 5.500 €
Kroger Agroliner SRB35 v1.0.0.3 FS19
Kroger Agroliner SRB35 v1.0.0.3 FS19 Version 1.0.0.3 Dedi bug fixed Today I leave you the Kröger Vörderbandtrailer Since I was the cramp discreetly on the bag, I decided to make the Kröger clear that I already used in the LS17. Pay attention to the Krampe, whose conveyor belt does not even run! (ridiculous) The trailer comes with: Towbar at the stern Large Kröger label purchasable Tire selection between Lizard (street) and Trelleborg (agrarian) You can also choose between a steering axle or without. I wish you a lot of fun with the Kröger! Credits:Modell: LS13 Model by Golim /ls17/19 by Ap0lLoTextur: Ap0lLoScript: Ap0lLoIdee / Konzept: Ap0lLoTester: Ap0lLo
Scania R730 Semi v1.0.0.6 FS19
Scania R730 Semi v1.0.0.6 FS19 Version 1.0.0.6 Revised sounds Dedi bug fixed Color choice for trucks and rims Bullfänger buyable 2 Motor Configs, so that the good pulls everything, what he should and where he should download only with original DL link Have fun with the Scania your Ap0lLo Credits:Modell: Dinamix, Ap0lLoTextur: Ap0lLoScript: Ap0lLoIdee / Konzept: Ap0lLoTester: Ap0lLo
Michieletto AM19 v1.0.0.1 FS19
Michieletto AM19 v1.0.0.1 FS19 Version 1.0.0.1 Dedi bug fixed Today I have the AM19 for you, because the standart version just did not fit into my fleet, I have the trailer ado new lights missed, inserted reversing lights and position lights attached to the upper part of the trailer. Indicator and associated lighting inserted. Dynamic pants inserted Swapped rims Color selection installed Have fun with the AM19 Credits:Modell: GiantsTextur: GiantsScript: GiantsIdee / Konzept: Ap0lLoTester: Ap0lLo
Scania R730 HKL v1.0.0.8 FS19
Scania R730 HKL v1.0.0.8 FS19 Moin moin love community, Version 1.0.0.8 Revised sounds Dedi bug fixed Today I present you the Scania HKL with all the trimmings. The trailer is as appropriate in the LS17. The ITR containers that fit on the trailer have been included and there are no complications with the ITR Pack. The control for the Scania: K = retract hook M = extend hook (while the container is being loaded onto the trailer, you can extend the hook so that the truck does not lift off) J = lower body N = lift body This control ONLY serves to get to the container ran without lifting the rear. If you have the container coupled you can leave everything to the automatic and press X as usual. The controller for the trailer: Hold left Shift! K = Pull Container Attacher to the front Pull M = Container Attacher to the rear If the container is coupled, decouple, move attacher so that he is out of range and only then you can decouple the trailer. You can position yourself with the container exactly where you would like it. Motor Config consists of the R730 and the chip tuning. Tire Config consists of a steering axle and without. both Lizard Road and that stays that way! You can buy bullfighters Tires and truck Farbwahlt is of course also there. Credits:Modell:Ap0lLoTextur: Dimanix LS15Script: Ap0lLoIdee / Konzept: Ap0lLoTester: Ap0lLo
Scania R730 Semi 3 axle v1.0.0.3 FS19
Scania R730 Semi 3 axle v1.0.0.3 FS19 Version 1.0.0.3 Revised sounds Dedi bug fixed My Scania Semi was already quite good, now I have a 3 axle version for you. The truck is on the current update, like the other Scania’s Log is clean Have fun with it Credits:Modell: Ap0lLoTextur: DimanixScript: Ap0lLoIdee / Konzept: Ap0lLoTester: Ap0lLo
Krone EasyCut Pack FS19
KRONE EasyCut Pack consisting of the front mower F360 CV and the rear mower combination B1000 CV Collect does not only offer a powerful triple mower combination but also the ability to collect the crop into a swath. The mowers in combination have a maximum working width of 10,10m with the rear mowers being infinitely variable. Depending on the work mode the crop can be distributed across the whole working width or collected into a swath from both sides or only one side. The mowers can be equipped with the optional KRONE SectionControl, this feature controls the automatic lifting and lowering of the mowers when driving over already mowed sections of the field. EasyCut F360 CV: Price: 23000 € Working width: 3,6 m Max. working speed: 22 kph Required power: 90 hp EasyCut B1000 CV Collect: Price: 83000 € Working width: 10,10 m Max. working speed: 22 kph Required power: 200 hp
Lizard D882 V1.0 FS19
Lizard D882 V1.0 FS19 -Price: 21500 € -Color configuration -Tire configuration -Cover configuration -Capacity 25900 l Credits:Ostry, Kasztan18
Selling Station Placeable V1.0 FS19
Selling Station Placeable V1.0 FS19 Grain point of sale with an unloading ramp for trailers with a rigid frame. -Price: 1000 € -Maintenance: 2 € / day -Seasons Ready Credits:Ostry
Massey Ferguson 5650 And Massey Ferguson Cutter FS19
Massey Ferguson 5650 And Massey Ferguson Cutter FS19 Massey Ferguson 5650 Advanced 2004 Potência: 190 HP Preço: 180000 € Speed limit: 30 KM/H Grain tank capacity: 5000 litres Tire configurations Massey Ferguson cutter Price: 25000 € Working width: 6.20 meters Speed limit: 8 KM/H Credits:Wagner/Holzs FS Tags: Massey Ferguson
Lizard 112H v1.0 FS19
Lizard 112H v1.0 FS19 This truck is a model of the year 1991, it was a huge success on the roads for its durability, easy maintenance, low price and robustness, thus making it a great choice for your farm. -Optional: Airfoil. -Power: 500HP. -Max Speed: 80 KM/H -Animated mud guard. -Contains liftable shaft. -Cost: 70,000 € Credits:Tailan, Agro Mods
- 15 per page
- 30 per page
- 45 per page
- 60 per page
-
See more per page
Bigger pages, fewer clicks - and no ads anywhere.
Go Pro