Farming Simulator 17 mods

IT Runner Pack DH v3.0.0.0 by Bonecrusher6 FS17

New version of the already known mod Have a revised IT Runner Pack for you here. Included are: 1) IT Runner 26.33 HD (Tridem) 2 IT Runner 26.33 HD MCA (Tridem) [Arm can be partially lifted and lowered by mouse / When using the bale platform, the normal version is recommended, as the mouse-controlled arm interferes with the UAL script.] -> Both trailers have configurable brands (IT Runner, Krampe, Wiese Fahrzeugbau, STRONGA, Metaltech, Fliegl, BIGAB, Kröger (blue or white logos), Fortuna, Oehler and Goegl with selectable hydraulic units from Palfinger Palift, Hiab, Meiller, Hyva or H-lift) 3) Container for manure spreading in the variants Farmtech, Tebbe and Bergmann 4) Apply containers to manure with different brand configurations 5) Container for tree trunk transport (with autoload) 6) Container for bale and pallet transport with UAL script (supports Krone Ultima bales, HD bales and wooden pallets) Bales stackable via UAL, different configurations for the container (only platform, with UAL, with straps or with UAL and straps) 7) Halfpipe containers with different brand configurations 8) Grain containers with different brand configurations 9) Häckselcontainer in the variants Bergmann, Briri, Claas, Hawe, Joskin, Krone, Krone Special, Mengele, Strautmann and Tebbe 10) Peecon Overload Container (Release of FSM) Except for the chaff container, a color choice is installed everywhere, with specially defined colors The trailer also has a wheel configuration (Twin Radial in 560 and 600 width, T404 in 600 and 710 width, each in 22.5 inches or 26.5 inches, Nokian tires). In addition, DynamicHoses are installed (6 hydraulic connections, 2 air connections and a power connection), animated dirt catcher (purchasable) and a lighted license plate. Since the manure and chaff containers cover the rear of the trailer, they have the tag of the trailer, without lighting. Since it is technically not possible for me otherwise what, the manure and Häckselcontainer are individually available in their variants. The manure containers can also be loaded with conveyor belts. With the chaff containers you still have the choice between grid or disc front. The manure and bulk containers have a design configuration for different brands or companies. Selectable would be: – Halfpipe: Ohne Marke, Gergen, Hüffermann, Fliegl, Decker, Ellermann, BECO, JK Agricultural Service, Bohmann Entsorgung, Agravis, Brantner, Bredehöft, Farmtech, Fortuna, Kröger (red, blue, white or green logos), Kröger Terraliner, Raiffeisen, Raiffeisen Agrarian, Bröring, For Farmers, grain AG, Gelamin, Hastreiter, Nienaber, Prohad, Krampe, Machine County Lower County (MG NG), Pro AGRO, Veit, Oehler and Weber – Grain Containers: Ohne Marke, Gergen, Hüffermann, Fliegl, Tebbe, Decker, Ellermann, Bohmann Entsorgung, Agravis, Brantner, Farmtech, Fortuna, Kröger (red, blue, white or green logos), Raiffeisen, Raiffeisen Agrar, Bröring, For Farmers, Getreide AG, Gelamin, Hastreiter, Nienaber, Prohad, KWS, SaatenUnion, Syngenta Seeds, Krampe, Maschinengemeinschaft Niedergrafschaft (MG NG), Rothkötter Compound Feed, AB Texel, Veit, Oehler and Weber – Slurry containers: Without brand, Bauer, Eckart, Fliegl, Joskin, Kaweco, Kotte, Oehler, Veenhuis, Zunhammer, Briri, Farmtech, machine community Niedergrafschaft (MG NG), Pro AGRO, Veit Partly completely newly created store pictures. Various adjustments in the xml’s Further information: Purchase price: varies by device Maintenance: varies by device Volume: varies by device Latest patch needed

Metalfor Futur 2000 for Farming Simulator 2017

Trailed sprayer 2000 Metalfor Futur for Farming Simulator 17. The cost of the sprayer in the game, €: 71000 Maintenance of the sprayer, €/day: 220 The working width of the processing, M.: 20 Tank volume, l: 2000 Tested in game version 1.5.3.1 Download trailer sprayer Metalfor Futur 2000 for Farming Simulator 17 you can click on the links below on the page. Not well provided author? Mistakes in mod description? Contact us, buddy!

Krampe DA 34 Roadrunner FS17

Included are: – Krampe DA35 Roadrunner chassis – Price 32700 euros – Dynamics Hoses – Tire selection – Krampe DA35 BigBody 47 – Volume 46900 liters – Price 24500 euros – color choice – Krampe DA35 BigBody 32 – Volume 31700 liters – Price 18300 Euro – color choice – Krampe liquid container – Volume 26000 liters – Price 34500 euros – color choice – Configurable as a water tank, fuel tank, manure feeder – Acquired pump technology – Compatible with trouser system – Compatible with manure pack – enclosed file for exchange in the CoursePlay5 -Mod, is stored in the folder _CoursePlay Copy and paste into CoursePlay folder, replace existing file with it. This includes the Roadrunner Manuretank usable with CourePlay for feeding. – Vehicle configuration for courseplay or hose system selectable, since I’ve found that if manure pits and feeders are equipped with the hose system, using Courseplay blocked the automatic filling at the slurry pit. So in such a case Courseplay can now be used, but the hose system must not be disabled, this can be selected at the Purchase options. This costs nothing, so reconfigurations are free of charge.

FS17 Slurrypack v7.0.0.2

FS17 Slurrypack v7.0.0.2 Changelog V7.0.0.2: – Fixed a problem with the normal overloading of Kotte feeder in field border container with key i – Fixed bug Coupling BioDrill from Väderstad Pack to Catros possible again Changelog V7.0.0.1: – Fixed Error with HoseSystem – Additional cameras with own HUD (rafftnix GUI) removed Changelog V7.0.0.0: – new images – Väderstad BioDrill is no longer available, it is now available in the Väderstad-Pack – 1x new Kotte TSA feeder added – Triedem 37000l capacity added – Wheel setups added – purchasable suction arm with 2 joints and telescopic bar added – 2 animated rubber cuffs for docking with suction arm added – color choice added – Zunhammer SKE 19500 second suction arm added as configurable option – currently set application rate is stored in the savegame – Hose System Ready v1.1.0.0 – Dynamic Hoses installed – Fixed fertilizer levels on patch 1.5.3.1 – Various fixes and improvements – enclosed file for exchange in the CoursePlay5 -Mod, is stored in the folder _CoursePlay Copy and paste into CoursePlay folder, replace existing file with it. This includes the Kotte Feeders, the Field Edge Container, and the Zunhammer Feeder usable with CourePlay for feeding. – Vehicle configuration for courseplay or hose system selectable, since I’ve found that if manure pits and feeders are equipped with the hose system, using Courseplay blocked the automatic filling at the slurry pit. So in such a case Courseplay can now be used, but the hose system must not be disabled, this can be selected at the Purchase options. This costs nothing, so reconfigurations are free of charge. – all Kotte TSA feeders have a rear mousecontrol rotatable connection piece for usage with the hose system – Additional cameras with own HUD (rafftnix GUI) installed Hello dear Com, today I can introduce you to my final version of my slurry pack. Some may already know it from Modhoster. For all those who do not know, here is a small introduction, what the pack can do everything. The pack serves to make the slurry output as realistic as possible shape. There are some functions that make this possible. All features are multiplayer and Dedicated and tested. A big thank you goes to Dj ToBe (Word of Farming Team) for the support at Dediserver-Ready and test. Was really ne great work. First of all, it is no longer enough to load, just next to the drum and press the R key. You must first use the suction arm in the Insert the rubber studs. For this you need less than 15cm to the cuff center position. The current distance is displayed at the bottom right. In addition, a hud appears in the lower right, which turns green when you overloaded. Then simply click “Start / Stop Filling” (Intputbinding IMPLEMENT_EXTRA3) press, then go. The overload speed depends on the speed In-game time. That means, if you play in Realtime (1x), then the Pump performance, which also has the barrel in genuine. If the barrel is a 6000l / min pump has filling for 18000l 3min. Has the ingame time 5x then is the Speed ??5x higher. Especially for Dedi servers that play realtime, though the fill goes too slowly, the turbo fill mode (button “Turbo overload active” intputbinding KEY_KP_4) activate. Then the factor can be specified for each barrel in the XML. The default is 15x. All Veenhuis and Kotte barrels have a purchaseable suction arm. If you do not buy a suction arm, the filling process can be carried out again by pressing button R. The suction arm can be pre-positioned by means of the “pipe-fold” function and returned to Park position. The preposition can be over Button “Suction arm pre-positioning further forward” / “Suction arm pre-positioning further back” (Inputbinding KEY_KP_plus / KEY_KP_minus) in the 10-degree grid. The control then goes via Mousecontrol. The Zunhammer drums have the suction arm as standard. For filling at the manure pit you can place the docking station in the Gülletrigger, and directly dock with the suction arm at the docking station and “suck” from the manure pit. If you do not want to use a docking station, fill again with key R. All dispensers have a variable dispensing control. about Button “Increase application rate” / “Reduce output quantity” (Inputbinding KEY_KP_plus / KEY_KP_minus) the output can be adjusted in m³ / ha (cubic meters per hectare). The Delivery rate is adapted to the vehicle speed automatically. The cultivators and disc harrows are designed for the Manure Mod. You should have this with you the Manure-Mod use, you get for equal work of the manure 2 fertilizer levels. If the Manure-Mod is not used, it slips at one level. All dispensers are switched on and off via “Implement raise / lower”. The dispensing devices, which can be seen clearly, have parithelium at the hose outlets. The tow hose rods leave behind the “dung texture”. This can be done with the Vogelsang Swing-Max can be switched on / off using the button “Slurry texture on / off” (Inputbinding KEY_KP_4). The Vogelsang Swing-Max tubing harness deserves its own heel. The working width can be adjusted via the button “Split 1 + 10” (Inputbinding KEY_lshift KEY_down) from 30m to 24m. Use button “Fold partial widths 2 + 9” (Inputbinding KEY_lshift KEY_up) from 24m to 18m. At 30m working width there are 10 partial widths, Button “Sub – width from right to left” (Inputbinding KEY_KP_7) of right to the left and with button “partial widths from left to right” (Inputbinding KEY_KP_9) from left to right. At 24m, there are 8 partial widths and at 18m 6. Via button “split all connect on” (Inputbinding KEY_KP_8) you can again switch all sub-widths on. Via button “SwingMax up and down” (Inputbinding KEY_KP_0) you are able to transfer the data raise and lower the rods. All excavation drums have a telescopic axle that can be bought Button “Telescope axis in / out” (Inputbinding IMPLEMENT_EXTRA2) and 3 tire sets. If you use the frontdocks, the spreading drum should not have a suction arm. Otherwise there there is overlap in the indication of the distance to the cuff. Now an overview of all contained vehicles with their functions: 1x docking station – for filling on the slurry bearing with suction arm – 2 Animated rubber cuffs for docking with suction arm 1x Frontdock Zunhammer – Raise / lower hose under tractor via implement / adjust mousecontrol to tractor – Front camera for easier docking 1x Frontdock Zunhammer Highline – Suction arm with 2 joints and telescopic – Raise / lower hose under tractor via implement / adjust mousecontrol to tractor – Front hydraulics for transport of the docking station or additional front weight – Front camera for easier docking 1x Kotte field edge container – 2 Animated rubber cuffs for docking with suction arm 1x built-up roof Terra-Variant Zunhammer TV – 19000l capacity – Suction arm with 2 joints and telescopic – Rear view camera 1x Zunhammer SKE 19500 – 19500 liters capacity – Buyable telescopic axle – 3 wheel sets – Suction arm with one joint and telescopic – Buyable rubber cuff, thus also usable as a feeder 3x Veenhuis Premium Integral – 1-axle 16000l capacity – Tandem 22000l capacity – Triedem 30000l of capacity – All available telescopic axles – All 3 wheel sets – All purchaseable suction arm with 2 joints and telescopic – All reversing camera – Triedem automatic lifting axle Level control (level <25% axis lifted) 3x Kotte TSA feeder - Tandem 22000l capacity - Tandem 30000l capacity - Triedem 30000l of capacity - All 2 wheel sets - All purchaseable suction arm with 2 joints and telescopic - Triedem 2 automatic lift axles Level controlled (Level <35% front axle lifted, level <10% rear axle lifted) - All 2 Animated rubber cuffs for docking with suction arm - All color selection 1x Amazone Catros - Working width 6m - Variable application rate 10m³ / ha - 40m³ / ha - Buyable mounting bracket for intercropping device - Outflow Particle - Purchaseable Syncut 1x Zunhammer Vibro - Working width 6m - Variable application rate 10m³ / ha - 40m³ / ha 1x Zunhammer Zunidisc - Working width 6m - Variable application rate 10m³ / ha - 40m³ / ha 1x Väderstad Carrier XL - Working width 7.8m - Variable application rate 10m³ / ha - 40m³ / ha - Buyable mounting bracket for intercropping device - Outflow Particle - Purchaseable Syncut 1x Väderstad BioDrill - Working width 6m - Suitable for Amazone Catros - This means that oil sherry can be sown as intercropping 1x Fliegl Dolly shortened - 2 wheel sets 1x Vogelsang SwingUp tow hose linkage - Working width 15m - Variable application rate 10m³ / ha - 40m³ / ha - Outflow Particle - The impact plate is activated 1x Vogelsang SwingMax towing hose linkage - working width variable 30m / 24m / 18m - Variable application rate 10m³ / ha - 40m³ / ha - Outflow Particle - partial width switching 1x Möscha double distributor - Working width 15m - Variable application rate 10m³ / ha - 40m³ / ha - Outflow Particle 1x IT runner feeder container - 16000l capacity - 1 Animated rubber cuffs for docking with suction arm 1x IT runner feeder container - 24000l of capacity - 1 Animated rubber cuffs for docking with suction arm

FS17 Väderstad Pack v2.0.0.1DH

FS17 Väderstad Pack v2.0.0.1 Väderstad Pack FS17 Included are: BioSpray 3000 – fertilizer spreader – 3000L capacity – Fertilizer application rate adjustable from 120L / Ha to 800L / Ha – All devices with AttacherLow attachment can be coupled – Adaptation of the coupling height to the soil tillage implement on devices with AttacherLow attachment via lifting / lowering of the BioSpray – Working width adjusts automatically to attached device – Dynamic-hoses-ready BioSpray 4500 – fertilizer spreader – 4500L capacity – Fertilizer application rate adjustable from 120L / Ha to 800L / Ha – All devices with AttacherLow attachment can be coupled – Adaptation of the coupling height to the soil tillage implement on devices with AttacherLow attachment via lifting / lowering of the BioSpray – All devices with lower link suspension can be coupled – Adaptation of the coupling height to the soil tillage implement for devices with lower linkage suspension via mouse control – Working width adjusts automatically to attached device – Dynamic-hoses-ready BioDrill – catch crop – 450L capacity – Can sow grass and oil radish – Can be combined with Amazone Catros from the manure pack – Working width adjusts automatically to attached device – Also “Solo” can be used, then working width 10m Carrier 820 + 1120 – Disc harrow – working width 8,20m or 11,20m – Attachable frame for Biodrill can be bought – Dynamic-hoses-ready TopDown 500 + 700 – Cultivator with plow and cultivator function (configurable) – Working width 4,80m or 6,80m – Attachable frame for Biodrill can be bought – Dynamic-hoses-ready Rapid A800S – Seeder with fertilizer function – Tank volume 2x 3000L – Working width 8,00m – Dynamic-hoses-ready Rollex 1320 – Harrow – Working width 13,20m – Dynamic-hoses-ready With the pack it is possible by combination of different devices to do several jobs in one operation. If you take e.g. the BioSpray and attach a cultivator (it can be attached to any cultivator with suitable Attacher), can be fertilized and grubbed at the same time. If you take e.g. the BioSpray and attach a cultivator (it can be attached to any cultivator with a suitable attacher), you can fertilize and cultivate at the same time. If you take the TopDown with its plow and cultivator function, you can do this at the same time as well. Fertilized, plowed and cultivated. If you buy the TopDown with the mounting frame for the BioDrill and connect it to it, you can sow a catch crop while also fertilizing, plowing, and cultivating simultaneously. The working width of the BioDrill and the BioSpray is automatically adjusted to the preferred soil cultivation device. Changelog V 2.0.0.0: – Bug Rollers Carrier 1120 fixed – Bug rolls Rollex 1320 fixed – TopDown 500 – Attachment frame for sowing machine added – Added BioSpray’s working cameras with dedicated HUD (rafftnix GUI) – Various improvements to BioSpray’s – BioSpray’s fertilizer will subgrade now, if attached device is dug, will continue, when device is lowered again – BioSpray’s can now be used as an additional fertilizer tank (Attached device is filled when the level of the attached device falls below 6%, then is replenished up to 16% when the biospray level is over 5%) – BioSpray is switched on, fertilizes it and refills the attached device, if it is switched off, it only serves as an additional fertilizer tank – a seed drill with fertilizer function is attached to the BioSpray, and the BioSpray is switched on, fertilizes the BioSpray in front of the drill, and the drill fertilizes again, so two Dehydration steps in one operation, while the seed drill is also filled (see above) – BioSpray4500 will now be completely empty – Working width adjusts to each attached implement properly – Height and inclination of the BioSpray’s adjustable via MouseControl Changelog V 2.0.0.1: – Additional cameras with own HUD (rafftnix GUI) removed – Automatic working width adjustment optimized to avoid banding at BioDrill

Kuhn Knight SLC 141 v2.0 for Farming Simulator 2017

Fertilizer spreader Kuhn Knight SLC 141 for Farming Simulator 17. The cost of the spreader in the game, €: 58900 Maintenance of manure spreader, €/day: 40 The volume of the body of the manure spreader, l: 15520 Working width, m: 15 Tested in game version 1.5.3.1 Download fertilizer spreader Kuhn Knight SLC 141 for Farming Simulator 17 you can click on the links below on the page. Not well provided author? Mistakes in mod description? Contact us, buddy!

Manual Lights

John Deere JD100K v1.1 for Farming Simulator 2017

Forage trailer John Deere JD100K for Farming Simulator 17. The cost of the trailer in the game, €: 262000 Maintenance of the trailer, €/day: 220 Body volume, l: 100000 Tested in game version 1.5.3.1 Download forage trailer John Deere JD100K for Farming Simulator 17 you can click on the links below on the page. Not well provided author? Mistakes in mod description? Contact us, buddy!

Richard Western CT8 v1.0.2 for Farming Simulator 2017

Shkotovsky trailer Richard Western CT8 for Farming Simulator 17. The cost of the trailer in the game, €: 19084 Maintenance of the trailer, €/day: 4 Tested in game version 1.5.3.1 Download Kotovsky trailer Richard Western CT8 for Farming Simulator 17 you can click on the links below on the page. Not well provided author? Mistakes in mod description? Contact us, buddy!

POTTINGER EUROBOSS 330 T twin tires v1.5 for Farming Simulator 2017

Forage trailer PÖTTINGER EUROBOSS 330 T for Farming Simulator 17. The cost of the trailer in the game, €: 25000 Maintenance of the trailer, €/day: 15 Body volume, l: 25300 Tested in game version 1.5.3.1 Download forage trailer PÖTTINGER EUROBOSS 330 T for Farming Simulator 17 you can click on the links below on the page. Not well provided author? Mistakes in mod description? Contact us, buddy!

Richard Western CT8 v1.0.1 for Farming Simulator 2017

Shkotovsky trailer Richard Western CT8 for Farming Simulator 17. The cost of the trailer in the game, €: 19084 Maintenance of the trailer, €/day: 4 Tested in game version 1.5.3.1 Download Kotovsky trailer Richard Western CT8 for Farming Simulator 17 you can click on the links below on the page. Not well provided author? Mistakes in mod description? Contact us, buddy!

FS17 Fortschritt E303

FS17 Fortschritt E303 Version 2.0.0 From E303 the texture has been improved. an E303 is now in blue. the colors of the cutter and cutter treiler may be selected in the ls menu otherwise everything is as it was

T 150K v1 25.6 for Farming Simulator 2017

Agricultural tractor T 150K with loader 25 for Farming Simulator 17. The value of the tractor in the game, €: 12800 Maintenance of the tractor, €/day: 30 Engine power, HP 165 Fuel tank volume, l: 316 Bucket capacity, l: 5000 Tested in game version 1.5.3.1 Download agricultural tractor T 150K with loader 25 for Farming Simulator 17 you can click on the links below on the page. Not well provided author? Mistakes in mod description? Contact us, buddy!

PLACEABLE MERCURY VAPOR LIGHT V2.0

34X120 TARPED BUILDING V1.0