Improved Truck Physics v1.0 ETS2

Euro Truck Simulator 2 Mods | American Truck Simulator Mods | May 2, 2026 Improved Truck Physics v1.0 ETS2 Improved Truck Physics for v1.58 Truck Physics Improvement mod for immersive gameplay This mod brings a more natural “bouncy” feel to the cabin and adjusts the chassis suspension to better simulate the weight and inertia of a heavy truck. Expect more realistic nodding, rolling, and overall smoother suspension travel. Key Changes: Enhanced Cabin Dynamics: Maximum pitch angles (front/rear and roll) have been adjusted to more realistic values, providing natural “nodding”. Softer cabin suspension with increased travel and reduced damping for a smoother, less “plastic” feel. Significantly reduced cabin sway bar factor, allowing for more natural lateral movement. Reworked Chassis Suspension: Reduced damping for both truck and trailer axles, making the suspension more reactive to road bumps. Lowered sway bar stiffness to allow for more realistic frame roll during cornering. Drivetrain & Inertia: Increased flywheel inertia for more realistic engine RPM behavior and smoother power delivery. IMPORTANT: “Physical camera movement” must be enabled “Physical camera movement factor” set to 200% “Interior camera horizon locking factor” set to 0% “Uneven surface simulation” set to 130% Cabin stiffness – 0% (Softer) – 20% (Harder) Suspension stiffness – 0% (Softer) – 20% (Harder) Truck and trailer Stabilization – 0% Braking intensity – 50% Torque resonance – 100% Steering sensitivity: 0.31 (0.31-0.33 Tolerance) (for keyboard) Steering non-linearity: 1.75 (for keyboard) Steering animation range: 1380° (for keyboard) Give this mod hight priority If you’re not sure about the suspension stiffness, here’s what I recommend: For older truck models: Cabin stiffness – 0% Suspension stiffness – 0% Or Cabin stiffness – 10% Suspension stiffness 0% For modern truck models: Cabin stiffness – 20% Suspension stiffness – 10% Or Cabin stiffness – 20% Suspension stiffness – 20%