American Truck Simulator mods
59,203 results- 15 per page
- 30 per page
- 45 per page
- 60 per page
-
See more per page
Bigger pages, fewer clicks - and no ads anywhere.
Go Pro
hell creek beef jerky trailer b4rt gd
here's a skin for B4RT reefer trailer in this pack there's two skins in the pack a clean and a dirty one
ETNYRE ULTIMATE LOWBOY TRAILERS PACK ATS 1.59-1.60.x (EXCLUSIVE MOD)
ETNYRE ULTIMATE LOWBOY TRAILERS PACK ATS 1.59-1.60.x (EXCLUSIVE MOD)
RSH SCS Flatbed Addon
Today I present my SCS Flatbed addon. Its admittedly really bare bones at the moment. Only adds a 5 axle chassis to the SCS Flatbed with the front 3 axles being liftable. It also has nodes on the back for big flags, at the moment just the US Flag. I don't know if I'll get around to adding much to it in the future, but I found it floating around on a hard drive so thought I would share it to the community.
Bus Cargo
New work to add to those of ATS, it is a bus from the Mexican company ETN. It is loaded on a flatbed semi-trailer, to which I have added some ramps to get the bus up and some straps to hold it down. I hope you enjoy. Important: Loading mods don't always load the first time, insert the zip into the ATS mods folder in the docs and leave it there, if you can't see the job listed then probably the next time you open ATS as It will be there. Enjoy it. Credits: EmbatMods Embat Sim @embatgames https://paypal.me/embatgames?country.x=ES&locale.x=es_ES
![[SCR] Peerless CTS-42 Chip Van](https://storage.truckymods.io/public/projects/scr-peerless-cts-42-chip-van/media/82vzrq3mVA3kj3qEf2Q4pBtb9TbTfZgkBz3JH8Cv.jpg)
[SCR] Peerless CTS-42 Chip Van
The Peerless CTS-42 is a lightweight chip van with an impressive 65,000 lb payload capacity. It is manufactured by KNL Holdings LLC out of Paragould, Arkansas. This mod brings this interesting trailer to life in ATS for ownership, and for the freight market. It has animated landing gear, trailer cable support, and advanced coupling. Current limitations For now, the tarp is always open. This will be addressed in a future update to take advantage of SCS' new empty cargo model feature which was added since this trailer was authored. For now, this does not support World of Trucks jobs. This is an unfortunate side effect of eliminating unrealistic loads like hay/scrapped cars (I've used a custom trailer type, and thus a custom cargo). Wheels This mod is intended to be used with my wheel pack. Make sure you have the Wheel Pack set with higher priority than the trailer(s) in the Mod Manager. You can use it without the Wheel Pack, but the default wheels do not look good on it. Special Thanks All of my Patreon supporters! - These wonderful people provide me with financial support each month which helps me spend more time making high quality mods like this! 50keda - 50keda for his invaluable support while learning SCS Blender Tools, and also for developing SCS Blender Tools Please, do not upload this elsewhere. My official distribution channels are Workshop, Trucky Mod Hub, and scr-rigs.com only. All brands and trademarks that appear in this mod are property of their respective owners.
New Dry Bulk Cargoes
This mod adds new cargoes for the SCS Dry Bulk Trailer. In the base game there are only a few cargoes for this trailer. This obviously limits the number of loads and a variety of shippers and receivers. I originally started on this for my own use but decided I'd take a crack at releasing and maintaining a mod since this seemed like something that more than a few people might appreciate. Currently the mod includes the following new cargoes: Bulk Flour (shipper Global Mills Food plant) Bulk Salt (shipper Global Mills Food plant) Bulk Starch (shipper Global Mills Food plant) Bulk Sugar (shipper Global Mills Food plant) These cargoes go to suitable receivers including the USBB plant, Darchelle Uzau wineries, Mon Coeur wineries, Global Mills Dairy plants, Fish Tail Foods plant, and Farmer's Barn plants with appropriate assignment for the type of business. The cargoes should work with any trailer that also uses the base game dry bulk cargoes, but I don't have any such mod trailers so I have not tested this. Feedback on this is welcome and I'll look into compatibility as and when I can. I make no promises about making this mod compatible with other specific mods. I do intend to add more cargoes over time as well as their suitable shippers and receivers, again as and when I can. There's no timeline for this to happen.
Hammy's Trailer Pack
Hammy's Trailer pack, a trailer pack that focuses both on performance and detail! I just wanna thank a few people, MrPeterK for testing! , Sartana Modding for helping me with decals, Faelandaea Dravin for quite a few models. Please don't be scared to report bugs as it will make it easier to fix them! I hope y'all will enjoy this as much as I'm enjoying it! Some trailers might take longer than others as I have issues IRL and I'm in school as of right now. So please bare with me whilst I try to figure out times to work on these trailers Have an awesome day! until next time for the Wabash Duraplate! Peace out Trailers I'm gonna add in the future: Utility 4000D-X Composite [On hold] Utility 4000-AE Flatbed and Drop Deck Utility 3000R [Not Started] Wabash ArcticLite [On hold] Wabash Duraplate [RELEASED!] Great Dane Champion and Everest [Not started] Vanguard Reefer and Dry Van [Not Started] Hyundai Translead Composite Join the discord! https://discord.gg/QmpmVwcJjW Credits: SCS for the landing gear model (Will be redoing soon!" Me for the chassis model plus body. Sartana Modding for some decals (Appreciate you very much!) Faelandaea Dravin for bumper model, rub rail model and vent model. MrPeterK for testing M a g i c for testing Rubicon for testing 0xferd for testing kuzima93 for brake chamber reference photos Changelog: 1.0 - Hyundai Translead Composite Release!! 2.0 - released Wabash Duraplate and new rivets on the Hyundai Composite.
![[SCR] Trailmobile SuperVan 90](https://storage.truckymods.io/public/projects/VBmAxC5eiXNQdyImzYRlhmQQbccMwlc2rT7KqDAA.jpg)
[SCR] Trailmobile SuperVan 90
Information about older Canadian semitrailers is scarce on the internet, but if you look through enough 1980's/90's Canadian trucking photos, the distinctive SuperVan 90 wordmark is likely to catch your eye more than a few times. As far as I know, these would have been made in the Brampton, ON plant starting in the early 80's. In addition to a wide variety of ownable lengths and axle configurations, this mod adds two variants of a classic Canadian dry van to the Freight Market: one with a 2+1 midlift (non-steer) axle configuration and one with a tridem, both 48' x 102". Naturally, this mod fully supports advanced coupling and trailer paint jobs and, of course, it is fully stand-alone. Wheels This mod is compatible with my wheel pack. It's not required, but if it is installed with higher priority than the trailer, it will use the Goodyear G314 285/75R24.5's. Special Thanks All of my Patreon supporters! - These wonderful people provide me with financial support each month which helps me spend more time making high quality mods like this! 50keda for his invaluable support while learning SCS Blender Tools, and also for developing SCS Blender Tools Resources Get the paint template here! Please, do not upload this elsewhere. My official distribution channels are Workshop, Trucky Mod Hub, and scr-rigs.com only. All brands and trademarks that appear in this mod are property of their respective owners.
![[SCR] Timpte Super Seal](https://storage.truckymods.io/public/projects/scr-timpte-super-seal/media/Iz2MQ9HUjgMI2t2f3OQDArScxf8YzSFTCQK08pvQ.jpg)
[SCR] Timpte Super Seal
Here's a blast from the past: a late-70's Timpte Super Seal. This rather distinctive reefer was a well-regarded lightweight option at the time. There's not a huge amount of information out there about these, besides that the plant, design, and Super Seal trademark were sold to Great Dane in the 80's. What's truly important is that it prominently features a parka-clad seal as part of its branding - probably the boldest appearance of any reefer ever. Wheels: This mod is intended to be used with my wheel pack. Make sure you have the Wheel Pack set with higher priority than the trailer(s) in the Mod Manager. You can use it without the Wheel Pack, but the default wheels do not look good on it. (Support coming in a future Wheel Pack update) Special Thanks: All of my Patreon supporters! - These wonderful people provide me with financial support each month which helps me spend more time making high quality mods like this! 50keda - 50keda for his invaluable support while learning SCS Blender Tools, and also for developing SCS Blender Tools Software Used: Blender 2.93 SCS Blender Tools Adobe Photoshop CC Adobe Illustrator CC Substance Designer Notepad++ Please, do not upload this elsewhere. My official distribution channels are Workshop, Trucky Mod Hub, and scr-rigs.com All brands and trademarks that appear in this mod are property of their respective owners. Unless explicitly stated otherwise, this mod is not endorsed by or otherwise affiliated with the owners of any trademarks that appear in it.
![[SCR] Alutrec Flatbed](https://storage.truckymods.io/public/projects/scr-alutrec-flatbed/media/5XkogApo2NbDUC3dYHLEYVhu7vbregJEme81Yeiv.jpg)
[SCR] Alutrec Flatbed
Alutrec is a small, but accomplished manufacturer of aluminum semitrailers based out of Laurier-Station, Quebec. They've been operating since 1995 and were acquired by Manac in 2018. This mod focuses on their flatbed model, as an ownable trailer in various axle configurations commonly used in Quebec and Ontario. Wheels This mod is intended to be used with my wheel pack. Make sure you have the Wheel Pack set with higher priority than the trailer(s) in the Mod Manager. You can use it without the Wheel Pack, but the default wheels do not look good on it. Credits Corby - Original trailer model SCS - Original cargo models Special Thanks All of my Patreon supporters! - These wonderful people provide me with financial support each month which helps me spend more time making high quality mods like this! 50keda - 50keda for his invaluable support while learning SCS Blender Tools, and also for developing SCS Blender Tools
Butane Fuel Trailer
Butane Trailer Credits billy1987 Reddog Corey Mitch bruno77 SCS Wheels Corby ATS Implementation of 1.32 cargoes added Converted to ATS by guidot AO Baked by guidot cargo implementation by guidot Skins by Mr. Smoke and original authors --------------------------------------------- Copyright 2023 HFG Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
![[SCR] Sparta 4 Bolster Log Trailer](https://storage.truckymods.io/public/projects/scr-sparta-4-bolster-log-trailer/media/oStUGAqha8hjYNWDgQxrnxCuDNcm10TxXycHd5LZ.jpg)
[SCR] Sparta 4 Bolster Log Trailer
This is a fairly standard 4-bolster log trailer made by Sparta Manufacturing out of Tallulah, Louisiana. Wheels This mod is compatible with my wheel pack. Make sure you have the Wheel Pack set with higher priority than the trailer(s) in the Mod Manager. This trailer uses the 11R24.5 Goodyear G314's on steel rims. Credits SCS - Cargo models from ATS log trailer and normal map texture Special Thanks 50keda for his invaluable support while learning SCS Blender Tools, and also for developing SCS Blender Tools mwl4 for developing ConverterPIX which drastically simplified the process of importing/adapting SCS' cargo models hardtruckisthebest (Ivan) for making the awesome PTTM mod that inspired this one Please, do not upload this elsewhere. My official distribution channels are Workshop, Trucky Mod Hub, and scr-rigs.com only. All brands and trademarks that appear in this mod are property of their respective owners.
Tremcar Tanker
Here is another trailer ingamed by me. Model is done but d3d darmin, with some habdorn stuff. This is version one more to come btrain in the works ;)
![[SCR] Fontaine Phantom](https://storage.truckymods.io/public/projects/scr-fontaine-phantom/media/hapwvM6vy5Y9ZlqWGKNWHSvFZGUot2k1T6l77KJv.png)
[SCR] Fontaine Phantom
The Fontaine Phantom is a discontinued model of all-aluminum flatbed trailer that was produced in the mid- to-late 2000's. This mod covers the three trim/beam rating options that were offered (Phantom ST, Phantom, and Phantom X) as ownable trailer options, and also has the more fleet-oriented Phantom ST available in the Freight Market. There is a modest amount of customization options, including a sidekit body option (currently using the curtainside body type). All of the base game flatbed cargoes are supported as of ATS 1.39, though a handful of models are still WIP (concrete tubes and pressure tank). For those who are using ProMods Canada, the plywood cargo from Canoe in Salmon Arm is also supported. ;) This was my first trailer mod for ATS, based on a vastly improved version of my original for 18WoS:PTTM. It has since been thoroughly reworked yet again to a much higher quality standard. Like my other mods, I will be adding and improving features in future updates. Wheels This mod is compatible with my wheel pack. It's not required, but if it is installed with higher priority than the trailer, it will use the Goodyear G314 285/75R24.5's. Credits Corby - Hendrickson Intraax suspension (heavily modified by Smarty) SCS - Some cargo models from the ATS flatbed trailer Special Thanks 50keda for his invaluable support while learning SCS Blender Tools, and also for developing SCS Blender Tools mwl4 for developing ConverterPIX which drastically simplified the process of importing/adapting SCS' cargo models LMB for some advice on the hay cargo. Resources Get the paint template here! Please, do not upload this elsewhere. My official distribution channels are Workshop, Trucky Mod Hub, and scr-rigs.com only. All brands and trademarks that appear in this mod are property of their respective owners.
Manac Ultraplate
2011 Manac Ultraplate Original Credits Chris Ivan Claus Malcolm Wheels Corby ATS Transition Bake: guidot Cargo Config: BK Vissers Template for ownable trailer: Template --------------------------------------------- Copyright 2023 HFG Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
- 15 per page
- 30 per page
- 45 per page
- 60 per page
-
See more per page
Bigger pages, fewer clicks - and no ads anywhere.
Go Pro